USB7002TSLASHKDX datasheet(51/56 Pages) MICROCHIP

51 / 56 page

 2022 Microchip Technology Inc. and its subsidiaries

DS00002670G-page 51

USB7002

APPENDIX A: DATA SHEET REVISION HISTORY

TABLE A-1:

REVISION HISTORY

Revision Level & Date

Section/Figure/Entry

Correction

DS00002670G (03-03-22)

Cover

Power USB-IF Certified bullet modified.

Section 3.1, Pin Assignments

Pin reset states updated for pins 37-43, and

81-88.

Table 3-1, "Pin Descriptions"

Value updated from 44.2 k to 43 k for Down-

stream Port 1 Type-C Voltage Monitor.

Section 8.3, CC Pin Orientation and

Detection

Updated last paragraph for clarity.

DS00002670F (08-03-20)

USB Implementation Forum numbering update: “USB 3.1” changed to “USB 3.2”; title

modified.

Section 3.1, Pin Assignments

Pin reset states added to table.

Section 9.0, Operational Characteris-

tics

Note added following Figure 9-1: “The Power

Supply Rise time requirement does not apply

if the RESET_N signal is held low during

power on and released after power levels rise

and stabilize above the power on thresholds,

or if the RESET_N signal is toggled after

power supplies become stable.”

Section 9.2, Operating Conditions**

• +1.2 V Supply Voltage Rise Time >

Increased from 400us to 5ms

• +3.3 V Supply Voltage Rise Time >

Increased from 400us to 5ms

Table 9-3, "I/O DC Electrical Charac-

teristics"

Note 4 deleted, replaced with 0.9V in both

instances.

DS00002670E (04-02-20)

• Sales Listing page updated

• Chapter 3, Revision Level in footer corrected

• Trademark symbol corrected

DS00002670D (08-13-19)

Section 2.1, General Description

Document Title

Key Benefits on cover

• Updated last sentence of the first para-

graph for greater clarity.

• Title modified changing “Controller” to

“PD Smart”

• “USB Power Delivery Billboard Device

Support” bullet removed

• Added TID data

Table 3-5, Table 3-6

• Changed PF15 from PRT_CTL3 to

PRT_CTL2

• Changed PF16 from PRT_CTL2 to

PRT_CTL3

• Updated programmable functions

descriptions table to match new assigned

PRT_CTLx and PRT_CTLx_U3 numbers.

Section 3.4, Physical and Logical Port

Mapping

Added new section with physical and logical

port mapping.

Figure 2-1

Updated internal PHY numbering to match

physical port numbering detailed in new

Section 3.4, Physical and Logical Port Map-

ping.

USB7002T/KDX 数据表(PDF) 51 Page - Microchip Technology

USB7002T/KDX 数据表(HTML) 51 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56

数据表下载