| 数据搜索系统,热门电子元器件搜索 |
|
USB7002T/KDX 数据表(PDF) 12 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
USB7002T/KDX 数据表(HTML) 12 Page - Microchip Technology |
|
12 / 56 page ![]() USB7002 DS00002670G-page 12 2022 Microchip Technology Inc. and its subsidiaries Downstream Port 2 USB 3.2 Gen 1 TX D- Orientation B USB3DN_TXDM2B I/O-U Downstream USB Type-C “Orientation B” Super Speed Transmit Data Minus, port 2. Downstream Port 2 USB 3.2 Gen 1 RX D+ Orientation B USB3DN_RXDP2B I/O-U Downstream USB Type-C “Orientation B” Super Speed Receive Data Plus, port 2. Downstream Port 2 USB 3.2 Gen 1 RX D- Orientation B USB3DN_RXDM2B I/O-U Downstream USB Type-C “Orientation B” Super Speed Receive Data Minus, port 2. USB 2.0 Interfaces Upstream USB 2.0 D+ USB2UP_DP I/O-U Upstream USB 2.0 Data Plus (D+). Upstream USB 2.0 D- USB2UP_DM I/O-U Upstream USB 2.0 Data Minus (D-). Downstream Ports 1-4 USB 2.0 D+ USB2DN_DP[1:4] I/O-U Downstream USB 2.0 Ports 1-4 Data Plus (D+). Downstream Ports 1-4 USB 2.0 D- USB2DN_DM[1:4] I/O-U Downstream USB 2.0 Ports 1-4 Data Minus (D-) VBUS Detect VBUS_DET IS This signal detects the state of the upstream bus power in legacy Type-B upstream implementations. When designing a detachable hub, this pin must be con- nected to the VBUS power pin of the upstream USB port through a resistor divider (50 k Ω by 100 kΩ) to provide 3.3 V. For self-powered applications with a permanently attached host, this pin must be connected to either 3.3 V or 5.0 V through a resistor divider to provide 3.3 V. In embedded applications, VBUS_DET may be con- trolled (toggled) when the host desires to renegotiate a connection without requiring a full reset of the device. USB Type-C Connector Control Downstream Port 1 Type-C Voltage Monitor DP1_VBUS_MON I/O12 Used to detect Type-C VBUS vSafe5V and vSafe0V states on Port 1. A potential divider is needed for this pin (43 k to 49.9 k , 1.0%). Downstream Port 1 Type-C CC1 DP1_CC1 I/O12 Used for Type-C attach and orientation detection on Port 1. Includes configurable Rp/Ra selection. Connect this pin directly to the CC1 pin of the respective Type-C con- nector. TABLE 3-1: PIN DESCRIPTIONS (CONTINUED) Name Symbol Buffer Type Description |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |