KSZ9567RTXI datasheet(76/232 Pages) MICROCHIP

76 / 232 page

KSZ9567R

DS00002329D-page 76

 2017-2019 Microchip Technology Inc.

5.1.2.3

In-Band Management (IBA) Control Register

This register controls the In-Band Access (IBA) feature.

Note 5-1

The default value of this field is determined by the associated configuration strap value. Refer to

Section 3.2.1, "Configuration Straps," on page 16 for additional information.

SYNCLKO Output Pin Enable

0 = Disabled

1 = Enabled

R/W

SYNCLKO Frequency

0 = 25 MHz

1 = 125 MHz

R/W

Address:

0x0104 - 0x0107

Size:

32 bits

Bits

Description

Type

Default

IBA Enable

The initial value is strapped in from the RX_DV7/CRS_DV7/RX_CTL7 pin.

0 = Disabled

1 = Enabled

R/W

Note 5-1

IBA Destination MAC Address Match Enable

Set this bit to enable checking of the destination MAC address in received

IBA frames against the switch MAC address in the Switch MAC Address 0

discarded.

When not enabled, the MAC address is not checked.

R/W

IBA Reset

Set this bit to initialize the IBA state machine. This bit is self-clearing.

R/W

28:24

RESERVED

0x00

23:22

Priority Queue for IBA response

Specifies the transmit priority queue for the IBA response frame. Typically

this value is not changed.

R/W

01b

21:19

RESERVED

00_0b

18:16

Port used for IBA communication

000 = Port 1

001 = Port 2

010 = Port 3

011 = Port 4

100 = Port 5

101 = Port 6

110 = Port 7

111 = Reserved

R/W

110

15:0

TPID (EtherType) value for IBA frame header

R/W

0x40FE

Bits

Description

Type

Default

KSZ9567RTXI 数据表(PDF) 76 Page - Microchip Technology

KSZ9567RTXI 数据表(HTML) 76 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载