AM29SL400CB100REF datasheet(25/44 Pages) AMD

25 / 44 page

January 23, 2007 Am29SL400C_00_A6

Am29SL400C

D A TA

SH EE T

ABSOLUTE MAXIMUM RATINGS

Storage Temperature

Plastic Packages . . . . . . . . . . . . . . . . . . . . –65

°C to +150°C

Ambient Temperature

with Power Applied. . . . . . . . . . . . . . . . . . . –65

°C to +125°C

Voltage with Respect to Ground

VCC (Note 1) . . . . . . . . . . . . . . . . . . . . . . . .–0.5 V to +2.5 V

A9, OE#,

and RESET# (Note 2) . . . . . . . . . . . . . . . .–0.5 V to +11.0 V

All other pins (Note 1) . . . . . . . . . . . . . –0.5 V to VCC+0.5 V

Output Short Circuit Current (Note 3) . . . . . . . . . . . 100 mA

Notes:

Minimum DC voltage on input or I/O pins is –0.5 V. During voltage

transitions, input or I/O pins may overshoot VSS to –2.0 V for

periods of up to 20 ns. See Figure 7. Maximum DC voltage on

input or I/O pins is VCC +0.5 V. During voltage transitions, input

or I/O pins may overshoot to VCC +2.0 V for periods up to 20 ns.

See Figure 8.

Minimum DC input voltage on pins A9, OE#, and RESET# is –0.5

V. During voltage transitions, A9, OE#, and RESET# may

overshoot VSS to –2.0 V for periods of up to 20 ns. See.

Maximum DC input voltage on pin A9 is +11.0 V which may

overshoot to 12.5 V for periods up to 20 ns.

No more than one output may be shorted to ground at a time.

Duration of the short circuit should not be greater than one

second.

Stresses above those listed under “Absolute Maximum Ratings” may

cause permanent damage to the device. This is a stress rating only;

functional operation of the device at these or any other conditions

above those indicated in the operational sections of this data sheet is

not implied. Exposure of the device to absolute maximum rating

conditions for extended periods may affect device reliability.

OPERATING RANGES

Commercial (C) Devices

Ambient Temperature (TA) . . . . . . . . . . . . . . . . 0°C to +70°C

Industrial (I) Devices

Ambient Temperature (TA) . . . . . . . . . . . . . . –40°C to +85°C

VCC Supply Voltages

VCC for full voltage range . . . . . . . . . . . . . +1.65 V to +2.2 V

VCC for regulated voltage range. . . . . . . . +1.70 V to +2.2 V

Note: Operating ranges define those limits between which the func-

tionality of the device is guaranteed.

20 ns

0.0 V

–0.5 V

20 ns

–2.0 V

Figure 7.

Maximum Negative Overshoot Waveform

20 ns

VCC

+2.0 V

VCC

+0.5 V

20 ns

2.0 V

Figure 8.

Maximum Positive Overshoot Waveform

AM29SL400CB100REF 数据表(PDF) 25 Page - Advanced Micro Devices

AM29SL400CB100REF 数据表(HTML) 25 Page - Advanced Micro Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44

数据表下载

链接网址

AM29SL400CB100REF 数据表(PDF) 25 Page - Advanced Micro Devices

AM29SL400CB100REF 数据表(HTML) 25 Page - Advanced Micro Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44

数据表 下载

链接网址

数据表下载