AS7341 datasheet(31/69 Pages) OSRAM

31 / 69 page

Document Feedback

AS7341

Datasheet

• PUBLIC

DS000504

• v3-00 • 2020-Jun-25

│ 30

GPIO 2 Register (Address 0xBE)

Figure 36:

GPIO2 Register

Addr: 0xBE

GPIO 2

Bit

Bit Name

Default

Access

Bit Description

7:4

reserved

GPIO_INV

GPIO Invert.

If set, the GPIO output is inverted.

GPIO_IN_EN

GPIO Input Enable.

If set, the GPIO pin accepts a non-floating input.

GPIO_OUT

GPIO Output.

If set, the output state of the GPIO is active directly.

GPIO_IN

GPIO Input.

Indicates the status of the GPIO input if

GPIO_IN_EN is set.

LED Register (Address 0x74)

Figure 37:

LED Register

Addr: 0x74

LED

Bit

Bit Name

Default

Access

Bit Description

LED_ACT

LED control.

0: External LED connected to pin LDR off

1: External LED connected to pin LDR on

6:0

LED_DRIVE

000 0100

LED driving strength.

000 0000: 4mA

000 0001: 6mA

000 0010: 8mA

000 0011: 10mA

000 0100: 12mA

……

111 1110: 256mA

111 1111: 258mA

Note: Bit LED_SEL (register 0x70) needs to be set

to “1” to control LED connected to pin LDR.

AS7341 数据表(PDF) 31 Page - OSRAM GmbH

AS7341 数据表(HTML) 31 Page - OSRAM GmbH

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69

数据表下载