Page 26

Datasheet, Public

Document Feedback

[v2-00] 2023-Mar-10

TSL2541 − Application Information

Schematic

Figure 39:

Typical Applications Circuit

Note(s):

1. The value of the I²C pull up resistors RPU should be based on the 1.8V bus voltage, system bus speed and trace capacitance.

2. The bulk capacitor can affect the stability of a regulated supply output and should be chosen with the regulator characteristics in

mind.

3. VSS and PGND should be connected to the same solid ground plane as close to the device as possible.

Application Information

1.8V

RPU

4.7μF

R = 22Ω

RINT = 10kΩ

Bulk System

Capacitance

TSL2541

VDD

VSS

INT

SCL

SDA

PGND

RPU

VBUS

INT

SDA

SCL