MPC862 datasheet(36/88 Pages) FREESCALE

36 / 88 page

MPC862/857T/857DSL PowerQUICC™ Family Hardware Specifications, Rev. 3

Freescale Semiconductor

Bus Signal Timing

Table 8 provides interrupt timing for the MPC862/857T/857DSL.

Figure 24 provides the interrupt detection timing for the external level-sensitive lines.

Figure 24. Interrupt Detection Timing for External Level Sensitive Lines

Figure 25 provides the interrupt detection timing for the external edge-sensitive lines.

Figure 25. Interrupt Detection Timing for External Edge Sensitive Lines

Table 8. Interrupt Timing

Num

Characteristic 1

The timings I39 and I40 describe the testing conditions under which the IRQ lines are tested when being

defined as level sensitive. The IRQ lines are synchronized internally and do not have to be asserted or

negated with reference to the CLKOUT.

The timings I41, I42, and I43 are specified to allow the correct function of the IRQ lines detection circuitry,

and has no direct relation with the total system interrupt latency that the MPC862/857T/857DSL is able to

support.

All Frequencies

Unit

Min

Max

I39

IRQx valid to CLKOUT rising edge (set up time)

6.00

I40

IRQx hold time after CLKOUT

2.00

I41

IRQx pulse width low

3.00

I42

IRQx pulse width high

3.00

I43

IRQx edge-to-edge time

4xTCLOCKOUT

—

CLKOUT

IRQx

I39

I40

CLKOUT

IRQx

I41

I42

I43

MPC862 数据表(PDF) 36 Page - Freescale Semiconductor, Inc

MPC862 数据表(HTML) 36 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88

数据表下载