| 数据搜索系统,热门电子元器件搜索 |
|
STW5094AD 数据表(PDF) 43 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STW5094AD 数据表(HTML) 43 Page - STMicroelectronics |
|
43 / 51 page ![]() 43/51 STw5094A STEREO AUDIO DAC and FM CHARACTERISTICS Unless otherwise specified, VCC = 2.7V to 3.3V, Tamb = -30°C to 85°C; typical characteristics are speci- fied at VCC = 3V, VCMHP=1.5V, Tamb =25°C; fAMCK = 13.0MHz; Full-Scale Input Sine Waves at 1015.625Hz; Input Sample Rate (Fs) = 48kHz; Input Data = 18Bits; Measurement Bandwidth is 20Hz to 20kHz, unweighted. Resistive load on HPL, HPR = 16 Ω). * Valid for Audio interface input (Audio Mode). **Calculation of TSF and SUT: we define: k=(fAMCK ⁄ fDIV) where fAMCK is the frequency of AMCK expressed in Hz and fDIV = 6144000·(AMCK_DIV+2), where AMCK_DIV is the content of CR18, bits1-0. The approximate startup time is obtained dividing 10.6 ms by k, and the transient suppression filter cutoff frequency is obtained multiplying 20Hz for k Note: Fs range: 8kHz - 48kHz. Symbol Parameter Test Condition Min. Typ. Max. Unit N Resolution* 18 Bits DYNR Dynamic Range A-weighted 89 93 dB SNR Signal to noise ratio 2Vpp output HPL, HPR gain set to -6dB 16 Ωload A-weighted unweighted (20 Hz to 20 kHz) 93 87 dB dB THDL Total Harmonic Distortion Worst case load 2Vpp output HPL, HPR gain set to -6dB 16 Ωload 0.01 0.03 % THD Total Harmonic Distortion 2Vpp output HPL, HPR gain set to -6dB 1k Ωload 0.004 % Deviation from Linear Phase* Measurement Bandwidth 20Hz to 20kHz, Fs= 48kHz. Combined digital and analog filter characteristics. 1Deg fPB Passband* Combined Digital and Analog filter characteristics. 00.45Fs kHz Passband Ripple* Combined Digital and Analog filter characteristics. 0.2 dB fSB StopBand* Combined Digital and Analog filter characteristics. 0.55Fs kHz StopBand Attenuationv Measurement Bandwidth up to 3.45Fs Combined Digital and Analog filter characteristics. 50 dB TSF Transient suppression filter cutoff frequency** 15 23 Hz Out Of Band Noise Measurement Bandwidth 20kHz to 100kHz. Zero input signal -90 dBr tgd Group Delay* 0.4 ms Interchannel Isolation* 2Vpp output HPR, HPL unloaded HPR, HPL with 16 Ω to VCMHP 100 55 dB dB Interchannel Gain Mismatch 0.2 dB Gain Error 0.5 dB SUT Startup Time from Power Up** 9.3 13.8 ms |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |