| 数据搜索系统,热门电子元器件搜索 |
|
KSZ9567R 数据表(PDF) 117 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
KSZ9567R 数据表(HTML) 117 Page - Microchip Technology |
|
117 / 233 page ![]() 2022 Microchip Technology Inc. and its subsidiaries DS00002329E-page 117 KSZ9567R 5.1.6.12 Global PTP Message Config 2 Register 4 Enable Detection of IPv4/UDP PTP Messages 1 = enable 0 = disable R/W 1b 3 Enable Detection of IPv6/UDP PTP Messages 1 = enable 0 = disable R/W 1b 2 Selection of P2P or E2E 1 = Peer-to-peer (P2P) transparent clock mode 0 = End-to-end (E2E) transparent clock mode R/W 0b 1 Selection of Master or Slave 1 = Host port is PTP master ordinary clock 0 = Host port is PTP slave ordinary clock R/W 0b 0 Selection of One-step or Two-step Operation 1 = One-step clock mode 0 = Two-step clock mode R/W 1b Address: 0x0516 - 0x0517 Size: 16 bits Bits Description Type Default 15:13 RESERVED RO 000b 12 Enable Unicast PTP 1 = The unicast PTP frames can be recognized. If the packet UDP destination port is either 319 or 320 and the frame MAC/IP address is not the PTP reserved address, then the frame will be considered as a unicast PTP frame and the frame forwarding will be decided by regular lookup table. 0 = Only multicast PTP frames will be recognized. R/W 1b 11 Enable Alternate Master 1 = Alternate master clock is supported. The Sync/Delay_Req frames of the same domain received at non-host ports by active master clock of the same domain will be forwarded to the non-host ports. 0 = Alternate master clock is not supported. The Sync/Delay_Req frames of the same domain received at non-host ports by active master clock of the same domain will be discarded on the host port and will be forwarded to the non-host ports if Sync/Delay_Req is for other domains. R/W 0b 10 PTP Messages Priority TX Queue 1 = All PTP messages are assigned to the highest priority TX queue. 0 = Only the PTP event messages are assigned to the highest priority TX queue. R/W 0b 9 Enable Checking of Associated Sync and Follow_up PTP messages Setting this bit will associate Follow_up message with Sync message when it has the same domain, sequenceID and sourcePortID. The PTP frame will be forwarded to the host port if the ID matches. R/W 0b Bits Description Type Default |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |