PSD913F2 datasheet(49/94 Pages) STMICROELECTRONICS

49 / 94 page

Preliminary Information

PSD9XX Family

The

PSD9XX

Functional

Blocks

(cont.)

Control

Direction

Defined In

Mode

PSDsoft

Setting

at Run-Time

MCU I/O

Declare pins only

1 = output,

0 = input,

PLD I/O

Logic or chip

select equations

Data Port

Selected for MCU

(Port A)

with non-mux bus

Address Out

Declare pins only

(Port A,B)

Address In

Declare pins only

(Port A,B,C,D)

JTAG ISP

Declare pins only

Table 21. Port Operating Mode Settings

*NA = Not Applicable

9.4.2.1 MCU I/O Mode

In the MCU I/O Mode, the microcontroller uses the PSD9XX ports to expand its own

I/O ports. By setting up the CSIOP space, the ports on the PSD9XX are mapped into the

microcontroller address space. The addresses of the ports are listed in Table 7.

A port pin can be put into MCU I/O mode by writing a ‘0’ to the corresponding bit in the

Control Register. The MCU I/O direction may be changed by writing to the corresponding

bit in the Direction Register. See the subsection on the Direction Register in the “Port

Registers” section. When the pin is configured as an output, the content of the Data Out

input through the Data In buffer. See Figure 19.

Ports C and D do not have Control Registers, and are in MCU I/O mode by default. They

can be used for PLD I/O if they are specified in PSDsoft.

9.4.2.2 PLD I/O Mode

The PLD I/O Mode uses a port as an input to the PLDs, and/or as an output from the

GPLD. The corresponding bit in the Direction Register must not be set to ‘1’ if the pin is

defined as a PLD input pin in PSDsoft. The PLD I/O Mode is specified in PSDsoft by

declaring the port pins, and then specifying an equation in PSDsoft.

PSD913F2 数据表(PDF) 49 Page - STMicroelectronics

PSD913F2 数据表(HTML) 49 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94

数据表下载

链接网址

PSD913F2 数据表(PDF) 49 Page - STMicroelectronics

PSD913F2 数据表(HTML) 49 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94

数据表 下载

链接网址

数据表下载