| 数据搜索系统,热门电子元器件搜索 |
|
SBPH400-3 数据表(PDF) 11 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
SBPH400-3 数据表(HTML) 11 Page - STMicroelectronics |
|
11 / 43 page ![]() SBPH400-3 11/43 If the request for transmit comes from the local link, then the arbitration control logic waits for an appropriate gap (all interfaces Idle), and then (unless the request is an immediate request) arbitrates as above. The arbitration logic supports all the arbitration enhancements specified in IEEE P1394a:- • arbitrated reset (a short reset which is delayed until a subaction gap arbitration) • ack-accelerated arbitration (immediate arbitration after an ACK) • fly-by arbitration (concatenation of packets after a packet received from a child port) 2.7 PHY packets 2.7.1 Link device interaction The SBPH400 will forward to the link (if the PHY/Link interface is active) every PHY packet received on the bus. The SBPH400 will interpret every PHY packet which it receives from the local link device for transmission on the bus (in addition to responding to every PHY packet received from the bus). The SBPH400 will act on it in exactly the same way as if the packet was received from the bus. 2.7.2 Self-ID packet The Self-ID packet has the following format: Figure 2.2 Self-ID packet format 1 0 phy_ID 0 L gap_cnt sp c pwr p0 p1 p2 i 0 logical inverse of first quadlet rsv 2 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |