| 数据搜索系统,热门电子元器件搜索 |
|
MC34708 数据表(PDF) 87 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
MC34708 数据表(HTML) 87 Page - Freescale Semiconductor, Inc |
|
87 / 159 page ![]() Analog Integrated Circuit Device Data 87 Freescale Semiconductor MC34708 Functional Block Description 7.8.3 General Purpose LED Drivers By default, the general purpose LED drivers are set to auto USB charger detect. If the VBUS pin is connected to detect what kind of accessory is attached to the USB port, the red LED can illuminate when a charger is attached in the following use case. If the both the main battery is dead (battery < UVDET) and coincell is dead (LICELL < 1.8 V) and power is applied to VBUS > 4.35 V, the red LED will automatically turn on. If the COINCELL (LICELL > 1.8 V) or battery > UVDET and the CHREN bit is set to 0, and power is applied to VBUS > 4.35 V, the LED's will stay off. To turn on the LED's the following bits must be set, CHRLEDxEN = 1, CHRGLEDOVRD =1, THERM bit = 1, and programming the duty cycle > 0/32. The general purpose LED drivers, CHRGLEDR, and CHRLEDG are independent current sink channels. Each driver channel features programmable current levels via CHRGLEDx[1:0], as well as programmable PWM duty cycle settings with CHRGLEDxDC[5:0]. By a combination of level and PWM settings, each channel provides flexible LED intensity control. By driving LEDs of different colors, color mixing can be achieved. The general purpose LED drivers include ramp up and ramp down patterns implemented in hardware. Ramping is enabled for each of the drivers using the corresponding CHRGLEDxRAMP bits, only when the repetition rate is 256 Hz. Table 81. LED Driver Control THERM CHRGLEDxEN(65) CHRGLEDOVRD CHRGLEDx(65) x 0 (default) 0 Auto USB charger detect 1 x x Off 0 1 1 On 0 1 Off Notes 65. “x” represents R or G Table 82. General Purpose LED Drivers Current Programming CHRGLEDx[1:0] CHRGLEDx Current Level (mA) 00 3.4 01 6.6 (default) 10 9.8 11 12.5 “x” represents for R, and G Table 83. General Purpose LED Drivers Duty Cycle Programming CHRGLEDxDC[5:0] Duty Cycle 000000 0/32, Off 000001 1/32 … … 010000 16/32 … … 011111 31/32 1xxxxx 32/32, Continuously On “x” represents R, and G |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |