M95320-R datasheet(45/48 Pages) STMICROELECTRONICS

45 / 48 page

M95320-W M95320-R M95320-DR

Revision history

Doc ID 5711 Rev 14

45/48

07-Jul-2006

Document converted to new ST template.

Packages are ECOPACK® compliant. PDIP package removed.

SO8N package specifications updated (see Table 23 and Figure 22).

M95640-S and M95320-S part numbers removed (DC and AC parameters

updated accordingly).

How to identify previous, current and new products by the Process

identification letter Table removed.

Figure 9: SPI modes supported updated and Note 2 added. First three

paragraphs of Section 4: Operating features replaced by Section 4.1:

Supply voltage (VCC).

TA added to Table 8: Absolute maximum ratings. ICC and ICC1 updated in

Table 13, Table 16, Table 16 and Table 19. VOL and VOH updated in

Table 16. ICC updated in Table 17. Data in Table 19 is no longer

preliminary.

tCH updated in Table 32. Table 21: AC characteristics (M95640-R) added.

Timing line of tSHQZ modified in Figure 21: Serial output timing.

Process letter added to Table 45: Ordering information scheme, Note 2

removed. Note 2 removed from Figure 2.

09-Oct-2007

JEDEC standard revision updated to D in Note 1 below Table 8: Absolute

maximum ratings.

Note 2 removed below Figure 8 and explanatory paragraph added.

Section 4.1: Supply voltage (VCC) updated. Table 5: Address range bits

corrected.

Products operating at VCC = 4.5 V to 5.5 V are no longer available in the

device grade 6 TA temperature range.

ICC and ICC1 parameters modified in Table 16: DC characteristics

(M95320-W, device grade 6).

Maximum frequency for M95320-W and M95640-W upgraded from 5 MHz

to 10 MHz in the device grade 6 TA temperature range (Table 32: AC

characteristics (M95080-W, device grade 6) modified accordingly).

Table 27: Available M95640x products (package, voltage range,

temperature grade): /PB process letter added, /P process letter removed.

Blank option removed below Plating technology in Table 45: Ordering

information scheme.

Table 25 and Table 27 added. Small text changes.

Table 24: UFDFPN8 (MLP8) - 8-lead ultra thin fine pitch dual flat no lead,

package mechanical data updated.

Package mechanical inch values calculated from mm and rounded to 4

decimal digits in Section 10: Package mechanical data.

17-Dec-2007

Section 3.8: VSS ground added.

Device behavior when VCC passes over the POR threshold updated (see

Section 4.1.2: Device reset and Section 4.1.4: Power-down).

VIL and VIH modified in Table 19: DC characteristics (M95640-DF, device

grade 6).

tW, write time, modified in Table 20: AC characteristics (M95320-R) and

Table 21: AC characteristics (M95640-R). Small text changes.

Table 23.

Document revision history (continued)

Date

Revision

Changes

M95320-R 数据表(PDF) 45 Page - STMicroelectronics

M95320-R 数据表(HTML) 45 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

数据表下载