I/O Vertical Migration for Cyclone V Devices

Figure 7: Vertical Migration Capability Across Cyclone V Device Packages and Densities

The arrows indicate the vertical migration paths. The devices included in each vertical migration path are

shaded. You can also migrate your design across device densities in the same package option if the devices

have the same dedicated pins, configuration pins, and power pins.

Variant

Member

Code

Package

M301

M383

M484

F256

U324

U484

F484

U672

F672

F896

F1152

Cyclone V E

A2

A4

A5

A7

A9

Cyclone V GX

C3

C4

C5

C7

C9

Cyclone V GT

D5

D7

D9

Cyclone V SE

A2

A4

A5

A6

Cyclone V SX

C2

C4

C5

C6

Cyclone V ST

D5

D6

You can achieve the vertical migration shaded in red if you use only up to 175 GPIOs. This migration path

is not shown in the Quartus II software Pin Migration View.

To verify the pin migration compatibility, use the Pin Migration View window in the Quartus

software Pin Planner.

Note:

Adaptive Logic Module

Cyclone V devices use a 28 nm ALM as the basic building block of the logic fabric.

The ALM, as shown in following figure, uses an 8-input fracturable look-up table (LUT) with four dedicated

registers to help improve timing closure in register-rich designs and achieve an even higher design packing

capability than previous generations.

Altera Corporation

Cyclone V Device Overview

Send Feedback

17

I/O Vertical Migration for Cyclone V Devices

CV-51001

2013.12.26