| 数据搜索系统,热门电子元器件搜索 |
|
CS4360 数据表(PDF) 17 Page - Cirrus Logic |
|
|
|||||||||||||||||||||||||||||
CS4360 数据表(HTML) 17 Page - Cirrus Logic |
|
17 / 36 page ![]() CS4360 DS517PP1 17 4.4.2 VOLUME CONTROL (XX_VOL) Default = 0 Function: The Digital Volume Control registers allow independent control of the signal levels in 1 dB increments from 0 to -119 dB. Volume settings are decoded as shown in Table 3. The volume changes are im- plemented as dictated by the Soft Ramp and Zero Cross bits. All volume settings less than -119 dB are equivalent to enabling the MUTE bit. 4.5 Mode Control 2 (address 0Dh) 4.5.1 SOFT RAMP AND ZERO CROSS CONTROL (SZC) Default = 10 00 - Immediate Change 01 - Zero Cross 10 - Soft Ramp 11 - Soft Ramp and Zero Cross Function: Immediate Change When Immediate Change is selected all level changes will be implemented immediately in one step. Zero Cross Zero Cross Enable dictates that signal level changes, either by attenuation changes or muting, will occur on a signal zero crossing to minimize audible artifacts. The requested level change will occur after a timeout period between 512 and 1024 sample periods (10.7 ms to 21.3 ms at 48 kHz sample rate) if the signal does not encounter a zero crossing. The zero cross function is independently mon- itored and implemented for each channel. Soft Ramp Soft Ramp allows level changes, both muting and attenuation, to be implemented by incrementally ramping, in 1/8 dB steps, from the current level to the new level at a rate of 1 dB per 8 left/right clock periods. Soft Ramp and Zero Cross Soft Ramp and Zero Cross dictates that signal level changes, either by attenuation changes or mut- ing, will occur in 1/8 dB steps and will be implemented on successive signal zero crossings. The 1/8 dB level changes will occur after timeout periods between 512 and 1024 sample periods (10.7 ms to 21.3 ms at 48 kHz sample rate) if the signal does not encounter zero crossings. The zero cross func- tion is independently monitored and implemented for each channel. Binary Code Decimal Value Volume Setting 0001010 0 dB 0010100 -20 -20 dB 0101000 -40 -40 dB 0111100 -60 -60 dB 1011010 -90 -90 dB Table 3. Example Digital Volume Settings 765 4321 0 SZC1 SZC0 CPEN PDN POPG FREEZE MCLKDIV SNGLVOL 100 1100 0 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |