BM71BLE01FC2 datasheet(54/64 Pages) MICROCHIP

54 / 64 page

BM70/BM71

DS60001372D-Page 54

 2015-2016 Microchip Technology Inc.

A user's manual for the finished product should include

the following statement:

Additional information on labeling and user information

requirements for Part 15 devices can be found in KDB

Publication 784748, which is available at the FCC

Office of Engineering and Technology (OET) Labora-

tory Division Knowledge Database (KDB)

http://apps.fcc.gov/oetcf/kdb/index.cfm.

A.1.3

RF EXPOSURE

All transmitters regulated by FCC must comply with RF

exposure requirements. KDB 447498 General RF

Exposure Guidance provides guidance in determining

whether proposed or existing transmitting facilities,

operations or devices comply with limits for human

exposure to Radio Frequency (RF) fields adopted by

the Federal Communications Commission (FCC).

From the FCC Grant: Output power listed is conducted.

This grant is valid only when the module is sold to OEM

integrators and must be installed by the OEM or OEM

integrators. This transmitter is restricted for use with

the specific antenna(s) tested in this application for

Certification and must not be co-located or operating in

conjunction with any other antenna or transmitters

within a host device, except in accordance with FCC

multi-transmitter product procedures. This module is

approved for installation into mobile or/and portable

host platforms

A.1.4

HELPFUL WEB SITES

Federal

Communications

Commission

(FCC):

http://www.fcc.gov

FCC Office of Engineering and Technology (OET) Lab-

oratory

Division

Knowledge

Database

(KDB):

http://apps.fcc.gov/oetcf/kdb/index.cfm.

A.2

Canada

The BM70/BM71 has been certified for use in Canada

under Industry Canada (IC) Radio Standards Specifica-

tion (RSS) RSS-247 and RSS-Gen. Modular approval

permits the installation of a module in a host device

without the need to recertify the device.

A.2.1

LABELING AND USER

INFORMATION REQUIREMENTS

Labeling Requirements for the Host Device (from Sec-

tion 3.1, RSS-Gen, Issue 4, November 2014): The host

device shall be properly labeled to identify the module

within the host device.

On BM71, due to the limited module size

(9.0 mm x 11.5 mm) the IC identifier is displayed in the

data sheet only and can not be displayed on the mod-

ule label.

The Industry Canada certification label of a module

shall be clearly visible at all times when installed in the

host device, otherwise the host device must be labeled

to display the Industry Canada certification number of

the module, preceded by the words "Contains transmit-

ter module", or the word "Contains", or similar wording

expressing the same meaning, as follows:

For the BM70:

For the BM71:

User Manual Notice for License-Exempt Radio Appara-

tus (from Section 8.4, RSS-Gen, Issue 4, November

2014): User manuals for license-exempt radio appara-

tus shall contain the following or equivalent notice in a

conspicuous location in the user manual or alterna-

tively on the device or both:

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation. This equip-

ment generates, uses and can radiate radio fre-

quency energy, and if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However,

there is no guarantee that interference will not occur

in a particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the follow-

ing measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

• Connect the equipment into an outlet on a circuit

different from that to which the receiver is con-

nected.

• Consult the dealer or an experienced radio/TV

technician for help.

Contains transmitter module

IC: 12246A-BM70BLES1F2

Contains transmitter module

IC: 12246A-BM71S2

This

device

complies

with

Industry

Canada

license-exempt RSS standard(s). Operation is sub-

ject to the following two conditions: (1) this device

may not cause interference, and (2) this device must

accept any interference, including interference that

may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Indus-

trie Canada applicables aux appareils radio exempts

de licence. L'exploitation est autorisée aux deux con-

ditions suivantes: (1) l'appareil ne doit pas produire

de brouillage, et (2) l'utilisateur de l'appareil doit

accepter tout brouillage radioélectrique subi, même

si le brouillage est susceptible d'en compromettre le

fonctionnement.

BM71BLE01FC2 数据表(PDF) 54 Page - Microchip Technology

BM71BLE01FC2 数据表(HTML) 54 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64

数据表下载