| 数据搜索系统,热门电子元器件搜索 |
|
SI5341 数据表(PDF) 41 Page - Silicon Laboratories |
|
|
|||||||||||||||||||||||||||||
SI5341 数据表(HTML) 41 Page - Silicon Laboratories |
|
41 / 53 page ![]() Pin Name Pin Number Pin Type1 Function Si5341 Si5340 Outputs OUT0 24 20 O Output Clocks. These output clocks support a programmable signal amplitude when configured as a differential output. Desired output signal format is configurable using register control. Termi- nation recommendations are provided in 3.5.2 Differential Output Terminations and 3.5.4 LVCMOS Output Terminations. Unused outputs should be left unconnected. OUT0b 23 19 O OUT1 28 25 O OUT1b 27 24 O OUT2 31 31 O OUT2b 30 30 O OUT3 35 36 O OUT3b 34 35 O OUT4 38 — O OUT4b 37 — O OUT5 42 — O OUT5b 41 — O OUT6 45 — O OUT6b 44 — O OUT7 51 — O OUT7b 50 — O OUT8 54 — O OUT8b 53 — O OUT9 59 — O OUT9b 58 — O Serial Interface I2C_SEL 39 38 I I2C Select.2 This pin selects the serial interface mode as I2C (I2C_SEL = 1) or SPI (I2C_SEL = 0). This pin is internally pulled up by a ~ 20 kΩ resistor to the voltage selected by the IO_VDD_SEL register bit. SDA/SDIO 18 13 I/O Serial Data Interface.2 This is the bidirectional data pin (SDA) for the I2C mode, or the bidirectional data pin (SDIO) in the 3-wire SPI mode, or the input data pin (SDI) in 4-wire SPI mode. When in I2C mode, this pin must be pulled-up using an external resistor of at least 1 kΩ. No pull-up resistor is needed when in SPI mode. A1/SDO 17 15 I/O Address Select 1/Serial Data Output.2 In I2C mode, this pin functions as the A1 address input pin and does not have an inter- nal pull up or pull down resistor. In 4-wire SPI mode this is the se- rial data output (SDO) pin (SDO) pin and drives high to the volt- age selected by the IO_VDD_SEL pin. SCLK 16 14 I Serial Clock Input.2 This pin functions as the serial clock input for both I2C and SPI modes.This pin is internally pulled up by a ~20 kΩ resistor to the voltage selected by the IO_VDD_SEL regis- ter bit. In I2C mode this pin should have an external pull up of at least 1 kΩ. No pull-up resistor is needed when in SPI mode. Si5341/40 Rev D Data Sheet Pin Descriptions silabs.com | Smart. Connected. Energy-friendly. Rev. 1.0 | 40 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |