AP0100CS datasheet(35/73 Pages) ONSEMI

35 / 73 page

AP0100CS/D Rev. 6, Pub. 1/16 EN

©Semiconductor Components Industries, LLC,2016.

AP0100CS HDR: Image Signal Processor (ISP)

Bayer Modes

Bayer output modes are only available in progressive output mode before STE. The data

ordering for the ALTM Bayer output modes for AP0100CS are shown in Table 14.

Table 14 and Table 15 show LSB aligned data; it is possible using register setting to obtain

MSB aligned data.

The data ordering for the Bayer output modes for AP0100CS are shown in Table 15.

Note:

Bayer_12 can be selected by setting cam_mode_select = 0x1 and requesting a Change-Config

operation.

Sensor Embedded Data

The AP0100CS is capable of passing sensor embedded data in Bayer output mode only.

The AP0100CS Statistics are available through the serial interface. Refer to the developer

guide for details.

Table 14:

ALTM Bayer Output Modes

Mode

Byte

D11

D10

ALTM_Bayer_10

Single

D98

ALTM_Bayer_12

Single

D11

D10

D9D8D7D6D5D4D3D2D1D0

Table 15:

Bayer Output Modes

Mode

Byte

D15 D14 D13 D12 D11 D10

Notes

Bayer_1

Singl

0000

D11 D10

RAW Bayer

data

AP0100CS 数据表(PDF) 35 Page - ON Semiconductor

AP0100CS 数据表(HTML) 35 Page - ON Semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73

数据表下载