| 数据搜索系统,热门电子元器件搜索 |
|
ST72774 数据表(PDF) 57 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST72774 数据表(HTML) 57 Page - STMicroelectronics |
|
57 / 144 page ![]() ST72774/ST727754/ST72734 57/144 SYNC PROCESSOR (SYNC) (Cont’d) 4.4.3 Input Signals The Sync Processor has the following inputs (TTL level): – VSYNCI1 Vertical Sync input1 – HSYNCI1 Horizontal Sync input1 or Composite sync – VSYNCI2 Vertical Sync input2 – HSYNCI2 Horizontal Sync input2 or Composite sync Note: The above input pairs can be used for DSUB or BNC connectors. To select these inputs use the HVSEL bit in the POLR register. – CSYNCI Sync on Green (external extractor) Note: If the CSYNCI pin is needed for another I/O func- tion, the composite sync signal can be connected to HSYNCI using the SCI0 bit in the MCR register. – HFBACK Horizontal Flyback input – VFBACK Vertical Flyback input 4.4.4 Input Signal Waveforms – The input signals must contain only synchroniza- tion pulses. In case of serration pulses on CSYN- CI/HSYNCI, the pulse width should be less than 8µs. – The VSYNCI signal is internally connected to Timer Input Capture 1 (ICAP1). – The HSYNCI or CSYNCI signal, prescaled by 256, is internally connected to Timer Input Cap- ture 2 (ICAP2). – Typical timing range: See Figure 38 and 39 – If the timer clock is 2 MHz (external oscillator fre- quency 24 MHz): PV accuracy = +/- 1 Timer clock (500ns) PH*256 accuracy = +/- 1 Timer clock (500ns) (PV= Vertical pulse, PH = Horizontal pulse) 4.4.5 Output Signals The Sync Processor has the following outputs: HSYNCO Horizontal Sync Output Enable: SYNOP bit in ENR register Programmable polarity: HS0/HS1 bits in MCR register In case of composite sync signal, the signal can be blanked by software during the vertical period (HINH bit in ENR register). In case of separate sync, no blanking is generated. VSYNCO Vertical Sync Output Enable: SYNOP bit in ENR register Programmable polarity: VOP bit in the MCR register In case of composite sync the delay of the extracted Vsync signal is: minimum: 500ns + HSYNCO pulse width maximum: 8750ns (max. threshold in ex- traction mode) |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |