STGAP1AS datasheet(60/70 Pages) STMICROELECTRONICS

60 / 70 page

Programming manual

STGAP1AS

60/70

DocID029344 Rev 2

The 2LTO_EN bit sets when the feature takes place according to Table 44. Refer to

Section 7.10 on page 33

for details.

The 2LTOth bit sets the 2-level turn-off threshold according to Table 36 on page 57 and the

2-level turn-off time according to Table 37.

The SENSE_EN bit sets if the sense overcurrent function is enabled or not (refer to

Section 7.8 on page 33

for details).

The DESAT_EN bit sets if the desaturation protection is enabled or not (refer to Section 7.6

on page 30

for details).

Set the CLAMP_EN bit to enable the Miller clamp feature (refer to Section 7.9 on page 33

for details).

Table 44. 2LTO mode

2LTO_EN

2LTO mode

2LTO always active

2LTO active only after a fault event

Table 45. SENSE comparator enabling

SENSE_EN

SENSE comparator status

SENSE comparator disabled

SENSE comparator enabled

Table 46. DESAT comparator enabling

DESAT_EN

DESAT comparator status

DESAT comparator disabled

DESAT comparator enabled

Table 47. Miller clamp feature enabling

CLAMP_EN

Miller clamp feature status

Miller clamp feature disabled

Miller clamp feature enabled

STGAP1AS 数据表(PDF) 60 Page - STMicroelectronics

STGAP1AS 数据表(HTML) 60 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70

数据表下载

链接网址

STGAP1AS 数据表(PDF) 60 Page - STMicroelectronics

STGAP1AS 数据表(HTML) 60 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70

数据表 下载

链接网址

数据表下载