 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
STGAP1AS 数据表(PDF) 24 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STGAP1AS 数据表(HTML) 24 Page - STMicroelectronics |
|
|
24 / 70 page  Logic supply management STGAP1AS 24/70 DocID029344 Rev 2 6.4 Standby function The device can be put in standby mode to reduce the power consumption on VDD via the SPI command “Sleep” (refer to Section 9.1.5 on page 51). The proper sequence is: 1. Pull-down the SD pin: the driver section will be put in “safe state” 2. Send a Sleep command 3. After a tsleep time the device can be considered actually in the sleep mode. To exit from the sleep mode it is necessary to set the SD high for at least tawake while keeping IN+ low. After a tawake time the device can accept new commands and the REGERRR bit is set to indicate that the device needs to be reprogrammed. If the SD pin is raised while tsleep is still not expired, the device returns to the operation mode within a tawake time. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
