| 数据搜索系统,热门电子元器件搜索 |
|
STTS2004 数据表(PDF) 26 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STTS2004 数据表(HTML) 26 Page - STMicroelectronics |
|
26 / 58 page ![]() Temperature sensor registers STTS2004 26/58 DocID024229 Rev 3 4.3 Temperature register (read-only) This 16-bit, read-only register stores the temperature measured by the internal band gap TS as shown inTable 13. When reading this register, the MSBs (bit 15 to bit 8) are read first, and then the LSBs (bit 7 to bit 0) are read. The result is the current-sensed temperature. The data format is 2s complement with one LSB = 0.25 °C for the default resolution. The MSB has a 128 °C resolution. The trip status bits represent the internal temperature trip detection, and are not affected by the status of the event or configuration bits (e.g. event output control or clear event). If neither of the above or below values are set (i.e. both are 0), then the temperature is exactly within the user-defined alarm window boundaries. 4.3.1 Temperature format The 16-bit value used in the trip point set and temperature read-back registers is 2s complement, with the LSB equal to 0.0625 °C (see Table 13). For example: 1. a value of 019C h represents 25.75 °C 2. a value of 07C0 h represents 124 °C, and 3. a value of 1E74 h represents –24.75 °C All unused resolution bits are set to zero. The MSB will have a resolution of 128 °C. The STTS2004 supports programmable resolutions (9-12 bits) which is 0.5 to 0.0625 °C/LSB. The default is 0.25 °C/LSB (10 bits) programmable. The upper 3 bits indicate trip status based on the current temperature, and are not affected by the event output status. Table 13. Temperature register format Sign MSB LSB(1) Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1(2) Bit 0(3) Flag bit Flag bit Flag bit Sign 128 64 32 16 8 4 2 1 0.5 0.25 0.125 0.0625 °C/LSB Above critical input(4) Above alarm window(4) Below alarm window(4) Temperature (default - 10 bit) 0 0 Flag bits Example hex value of 07C0 corresponds to 124 °C (10-bit) 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 07C0 h Flag bits Example hex value of 1EC0 corresponds to –20 °C (10-bit) 0 0 0 1 1 1 1 0 1 1 0 0 0 0 0 0 1EC0 h 1. Bit 2 is LSB for default 10-bit mode. 2. Depending on status of the resolution register, bit 1 may display 0.125 °C value. 3. Depending on status of the resolution register, bit 0 may display 0.0625 °C value. 4. See Table 15 for explanation. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |