STM32F078CB datasheet(115/120 Pages) STMICROELECTRONICS

115 / 120 page

DocID026006 Rev 4

115/120

STM32F078CB, STM32F078RB, STM32F078VB

Package information

117

As applications do not commonly use the STM32F078CB/RB/VB at maximum dissipation, it

is useful to calculate the exact power consumption and junction temperature to determine

which temperature range will be best suited to the application.

The following examples show how to calculate the temperature range needed for a given

application.

Example 1: High-performance application

Assuming the following application conditions:

Maximum temperature TAmax = 82 °C (measured according to JESD51-2), IDDmax = 50

mA, VDD = 3.5 V, maximum 20 I/Os used at the same time in output at low level with IOL

= 8 mA, VOL= 0.4 V and maximum 8 I/Os used at the same time in output at low level

with IOL = 20 mA, VOL= 1.3 V

PINTmax = 50 mA × 3.5 V= 175 mW

PIOmax = 20 × 8 mA × 0.4 V + 8 × 20 mA × 1.3 V = 272 mW

This gives: PINTmax = 175 mW and PIOmax = 272 mW:

PDmax= 175 + 272 = 447 mW

Using the values obtained in Table 76 TJmax is calculated as follows:

–

For LQFP64, 45 °C/W

TJmax = 82 °C + (45 °C/W × 447 mW) = 82 °C + 20.115 °C = 102.115 °C

This is within the range of the suffix 6 version parts (–40 < TJ < 105 °C).

In this case, parts must be ordered at least with the temperature range suffix 6 (see

Section 8: Ordering information

Note:

With this given PDmax we can find the TAmax allowed for a given device temperature range

(order code suffix 6 or 7).

Suffix 6: TAmax = TJmax - (45°C/W × 447 mW) = 105-20.115 = 84.885 °C

Suffix 7: TAmax = TJmax - (45°C/W × 447 mW) = 125-20.115 = 104.885 °C

Example 2: High-temperature application

Using the same rules, it is possible to address applications that run at high temperatures

with a low dissipation, as long as junction temperature TJ remains within the specified

range.

Assuming the following application conditions:

Maximum temperature TAmax = 100 °C (measured according to JESD51-2), IDDmax =

20 mA, VDD = 3.5 V, maximum 20 I/Os used at the same time in output at low level with

IOL = 8 mA, VOL= 0.4 V

PINTmax = 20 mA × 3.5 V= 70 mW

PIOmax = 20 × 8 mA × 0.4 V = 64 mW

This gives: PINTmax = 70 mW and PIOmax = 64 mW:

PDmax = 70 + 64 = 134 mW

Thus: PDmax = 134 mW

Using the values obtained in Table 76 TJmax is calculated as follows:

–

For LQFP64, 45 °C/W

TJmax = 100 °C + (45 °C/W × 134 mW) = 100 °C + 6.03 °C = 106.03 °C

STM32F078CB 数据表(PDF) 115 Page - STMicroelectronics

STM32F078CB 数据表(HTML) 115 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载