| 数据搜索系统,热门电子元器件搜索 |
|
NM1282KSLAXAL 数据表(PDF) 83 Page - Nanya Technology Corporation. |
|
|
|||||||||||||||||||||||||||||
NM1282KSLAXAL 数据表(HTML) 83 Page - Nanya Technology Corporation. |
|
83 / 120 page ![]() Version 1.3 83 Nanya Technology Corp. 06/2018 All Rights Reserved. © 2Gb SLC NAND + 2Gb LPDDR2 NM1282KSLAXAL NTC Proprietary Level: Property Differential Output Slew Rate With the reference load for timing measurements, the output slew rate for falling and rising edges is defined and measured between VOldiff(AC) and VOhdiff(AC) for differential signals as shown below. Differential Output Slew Rate Definition Description Defined by Measured From To Differential output slew rate for rising edge [VOHdiff(AC) – VOLdiff(AC)] / ΔTRdiff VOLdiff(AC) VOHdiff(AC) Differential output slew rate for falling edge [VOHdiff(AC) – VOLdiff(AC)] / ΔTFdiff VOHdiff(AC) VOLdiff(AC) Notes: Output slew rate is verified by design and characterization, and may not be subject to production testing. Differential Output Slew Rate Symbol Parameter LPDDR2 1066 Unit Min Max SRQdiff Differential output slew rate (output impedance = 40Ω ± 30%) 3.0 7.0 V/ns SRQdiff Differential output slew rate (output impedance = 60Ω ± 30%) 2.0 5.0 V/ns Definitions: SR = slew rate, Q = query output (similar to DQ = data-in, query-output), diff = differential signals NOTE 1 Measured with output reference load. NOTE 2 The output slew rate for falling and rising edges is defined and measured between VOL(AC) and VOH(AC). NOTE 3 Slew rates are measured under normal SSO conditions, with 1/2 of DQ signals per data byte driving logic-high and 1/2 of DQ signals per data byte driving logic-low. AC Overshoot/Undershoot Specification Parameter 1066 Unit Maximum peak amplitude provided for overshoot area Max 0.35 V Maximum peak amplitude provided for undershoot area Max 0.35 V Maximum area above VDD Max 0.15 V-ns Maximum area below VSS Max 0.15 V-ns Notes: 1. VDD stands for VDDCA for CA[9:0], CK, , , and CKE. VDD stands for VDDQ for DQ, DM, DQS, and . 2. VSS stands for VSS for CA[9:0], CK, , , and CKE. VSS stands for VSS for DQ, DM, DQS, and . 3. Values are referenced from actual VDDQ, VDDCA and VSS levels. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |