NM1282KSLAXAL datasheet(45/120 Pages) NANYA

45 / 120 page

Version 1.3

Nanya Technology Corp.

06/2018

2Gb SLC NAND + 2Gb LPDDR2

NM1282KSLAXAL

NTC Proprietary

Level: Property

(6)Acceptable commands after Serial Input command “80h”

nce the Serial Input command “80h” has been input, do not input any command other than the Column

Address Change in Serial Data Input command “85h”, Auto Program command “10h”, Multi Page Program

command “11h”, Auto Program with Data Cache Command “15h”, or the Reset command “FFh”.

If a command other than “85h” , “10h” , “11h” , “15h” or “FFh” is input, the Program operation is not performed

and the device operation is set to the mode which the input command specifies.

(7)Addressing for Program Operation

Within a block, the pages must be programmed consecutively from the LSB (least significant bit) page of the

block to MSB (most significant bit) page of the block. Random page address programming is prohibited.

Page 63

Page 31

Page2

Page 1

Page 0

(64)

(32)

(3)

(1)

‧

(2)

Ex.) Random page program (Prohibition)

DATA IN: Data(1)  Data (64)

Data Register

From the LSB page to MSB page

DATA IN: Data(1)  Data (64)

Data Register

Page 63

Page 31

Page2

Page 1

Page 0

(64)

(2)

(3)

(32)

‧

(1)

NM1282KSLAXAL 数据表(PDF) 45 Page - Nanya Technology Corporation.

NM1282KSLAXAL 数据表(HTML) 45 Page - Nanya Technology Corporation.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载