| 数据搜索系统,热门电子元器件搜索 |
|
PCF8536AT 数据表(PDF) 8 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
PCF8536AT 数据表(HTML) 8 Page - NXP Semiconductors |
|
8 / 54 page ![]() PCA85233 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2018. All rights reserved. Product data sheet Rev. 5 — 12 November 2018 8 of 54 NXP Semiconductors PCA85233 Automotive 80 × 4 LCD driver for low multiplex rates An additional feature is for an arbitrary selection of LCD segments to blink. This applies to the static and 1:2 multiplex drive modes and can be implemented without any communication overheads. By means of the output bank selector, the displayed RAM banks are exchanged with alternate RAM banks at the blink frequency. This mode can also be specified by the blink-select command. In the 1:3 and 1:4 multiplex modes, where no alternate RAM bank is available, groups of LCD segments can blink by selectively changing the display RAM data at fixed time intervals. If the entire display can blink at a frequency other then the typical blink frequency. This can be effectively performed by resetting and setting the display enable bit E at the required rate using the mode-set command (see Table 6). 7.3 Display RAM The display RAM is a static 80 4 bit RAM which stores LCD data. There is a one-to-one correspondence between • the bits in the RAM bitmap and the LCD segments/elements • the RAM columns and the segment outputs • the RAM rows and the backplane outputs. A logic 1 in the RAM bitmap indicates the on-state of the corresponding LCD element; similarly, a logic 0 indicates the off-state. The display RAM bit map, Figure 4, shows rows 0 to 3 which correspond with the backplane outputs BP0 to BP3, and columns 0 to 79 which correspond with the segment outputs S0 to S79. In multiplexed LCD applications the segment data of the first, second, third and fourth row of the display RAM are time-multiplexed with BP0, BP1, BP2, and BP3 respectively. Table 12. Blink frequencies Blink mode Operating mode ratio Blink frequency with respect to fclk (typical) Unit fclk = 3.600 kHz fclk = 5.280 kHz off - blinking off blinking off Hz 14.7 6.9 Hz 22.3 3.4 Hz 31.2 1.7 Hz f clk 768 --------- f clk 1536 ------------ f clk 3072 ------------ |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |