| 数据搜索系统,热门电子元器件搜索 |
|
KSZ9563RNXI-TR 数据表(PDF) 45 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
KSZ9563RNXI-TR 数据表(HTML) 45 Page - Microchip Technology |
|
45 / 226 page ![]() 2017-2018 Microchip Technology Inc. DS00002419D-page 45 KSZ9563R 4.4.17.3 Action Rule Description EQ Equal / Not Equal 0 = Not Equal produces true result 1 = Equal produces true result MAX PORT[15:0] MIN PORT[15:0] Max and Min Ports for TCP/UDP or TCP Sequence Number[31:0] PC[1:0] Port Comparison 00 = Port comparison is disabled 01 = Port matches either one of MAX or MIN 10 = Match if port number is in the range of MIN to MIN 11 = Match if port number is out of the range PRO[7:0] IPv4 protocol to be matched FME TCP Flag Match Enable 0 = TCP FLAG matching disabled 1 = TCP FLAG matching enabled FMASK[7:0] TCP FLAG Mask 0 = This bit of the Flag field is compared 1 = This bit of the Flag field is not compared FLAG[7:0] TCP Flag to be matched TABLE 4-20: ACL ACTION RULE PARAMETERS FOR NON-COUNT MODES (MD ≠ 01 OR ENB ≠ 00) Parameter Description PM[1:0] Priority Mode 00 = ACL does not specify the packet priority. Priority is determined by standard QoS functions. 01 = Change packet priority to P[2:0] if it is greater than QoS result. 10 = Change packet priority to P[2:0] if it is smaller than the QoS result. 11 = Always change packet priority to P[2:0]. P[2:0] Priority value RPE Remark Priority Enable 0 = Disable priority remarking 1 = Enable priority remarking. VLAN tag priority (PCP) bits are replaced by RP[2:0]. RP[2:0] Remarked Priority value MM[1:0] Map Mode 00 = No forwarding remapping 01 = The forwarding map in FORWARD is OR'ed with the forwarding map from the Address Lookup Table. 10 = The forwarding map in FORWARD is AND'ed with the forwarding map from the Address Lookup Table. 11 = The forwarding map in FORWARD replaces the forwarding map from the Address Lookup Table. FORWARD[N-1:0] Forwarding Ports Bit 0 corresponds to port 1 Bit 1 corresponds to port 2, etc. 0 = Do not forward to this port 1 = Forward to this port TABLE 4-19: ACL MATCHING RULE PARAMETERS FOR MD = 11 (CONTINUED) Parameter Description |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |