CS5920 datasheet(40/160 Pages) AMCC

40 / 160 page

S5920 – PCI Product

Revision 1.01 – November 28, 2005

AMCC Confidential and Proprietary

DS1596

Data Book

Bit

Description

15:10

Reserved. Hardwired to 0.

Fast Back-to-Back Enable. This bit enables fast back-to-back capability for bus master transaction. The S5920

is a target-only device and hardwires this bit to a 0.

System Error Enable. Setting this bit to a 1 allows the S5920 to drive the SERR# signal. Setting to a 0 will dis-

able the output driver. The assertion of RESET# will set this bit to a 0. The SERR# pin driven active normally

signifies a parity error occurred during a PCI address phase.

Wait Cycle Enable. Controls whether a device implements address/data stepping. This bit is hardwired to 0 as

the S5920 does not uses stepping.

Parity Error Enable. This bit allows the S5920 to drive the PERR# and to generate a SERR# signal. A one

allows the parity generation and a 0 will disable generation of a parity error indication. This bit is set to 0 when

RESET# is asserted.

Palette Snoop Enable. Enables VGA compatible devices to perform palette snooping. This bit is hardwired to a

0 as the S5920 is not a PCI-based VGA device.

Memory Write and Invalidate Enable. This bit enables bus masters to generate Memory Write and Invalidate

PCI bus commands when set to a 1. When set to 0, bus masters generate memory write commands instead.

The S5920 is a PCI target only and therefore hardwires this bit to 0.

Special Cycle Enable. Setting this bit to one enables devices monitoring of PCI special cycles. The S5920 does

not monitor (or generate) special cycles and hardwires this bit to 0.

Bus Master Enable. This bit allows a PCI device to function as a Bus Master. The S5920 is a PCI target device

only and hardwires his bit to 0.

Memory Space Enable. This bit enables S5920 memory region decodes to any of the five defined base address

is asserted.

I/O Space Enable. This bit enables S5920 I/O region decodes to any of the five defined base address register I/

O regions. This bit is cleared to 0 when RESET# is asserted.

CS5920 数据表(PDF) 40 Page - Applied Micro Circuits Corporation