ST7FL15F1MATRE datasheet(12/138 Pages) STMICROELECTRONICS

12 / 138 page

ST7L15, ST7L19

12/138

FLASH PROGRAM MEMORY (cont’d)

4.5 MEMORY PROTECTION

There are two different types of memory protec-

tion: Readout Protection and Write/Erase Protec-

tion, which can be applied individually.

4.5.1 Readout Protection

Readout protection, when

selected, protects

against program memory content extraction and

against write access to Flash memory. Even if no

protection can be considered as totally unbreaka-

ble, the feature provides a very high level of pro-

tection for a general purpose microcontroller. Both

program and data E2 memory are protected.

In Flash devices, this protection is removed by re-

programming the option. In this case, both pro-

gram and data E2 memory are automatically

erased and the device can be reprogrammed.

Readout protection selection depends on the de-

vice type:

– In Flash devices it is enabled and removed

through the FMP_R bit in the option byte.

– In ROM devices it is enabled by the mask

option specified in the Option List.

4.5.2 Flash Write/Erase Protection

Write/erase protection, when set, makes it impos-

sible to both overwrite and erase program memo-

ry. It does not apply to E2 data. Its purpose is to

provide advanced security to applications and pre-

vent any change being made to the memory con-

tent.

Warning: Once set, Write/erase protection can

never be removed. A write-protected Flash device

is no longer reprogrammable.

Write/erase protection is enabled through the

FMP_W bit in the option byte.

4.6 RELATED DOCUMENTATION

For details on Flash programming and ICC proto-

col, refer to the ST7 Flash Programming Refer-

ence Manual and to the ST7 ICC Protocol Refer-

ence Manual

4.7 REGISTER DESCRIPTION

FLASH CONTROL/STATUS REGISTER (FCSR)

Read/Write

Reset Value: 000 0000 (00h)

1st RASS Key: 0101 0110 (56h)

2nd RASS Key: 1010 1110 (AEh)

Note: This register is reserved for programming

using ICP, IAP or other programming methods. It

controls the XFlash programming and erasing op-

erations.

When an EPB or another programming tool is

used (in socket or ICP mode), the RASS keys are

sent automatically.

000

OPT

LAT

PGM

ST7FL15F1MATRE 数据表(PDF) 12 Page - STMicroelectronics

ST7FL15F1MATRE 数据表(HTML) 12 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载