| 数据搜索系统,热门电子元器件搜索 |
|
WM8731SEDS/R 数据表(PDF) 5 Page - Wolfson Microelectronics plc |
|
|
|||||||||||||||||||||||||||||
WM8731SEDS/R 数据表(HTML) 5 Page - Wolfson Microelectronics plc |
|
5 / 63 page ![]() WM8731 / WM8731L Production Data w PD Rev 4.3 August 2006 5 PIN DESCRIPTION 28 PIN SSOP 28 PIN QFN NAME TYPE DESCRIPTION 1 5 DBVDD Supply Digital Buffers VDD 2 6 CLKOUT Digital Output Buffered Clock Output 3 7 BCLK Digital Input/Output Digital Audio Bit Clock, Pull Down, (see Note 1) 4 8 DACDAT Digital Input DAC Digital Audio Data Input 5 9 DACLRC Digital Input/Output DAC Sample Rate Left/Right Clock, Pull Down (see Note 1) 6 10 ADCDAT Digital Output ADC Digital Audio Data Output 7 11 ADCLRC Digital Input/Output ADC Sample Rate Left/Right Clock, Pull Down (see Note 1) 8 12 HPVDD Supply Headphone VDD 9 13 LHPOUT Analogue Output Left Channel Headphone Output 10 14 RHPOUT Analogue Output Right Channel Headphone Output 11 15 HPGND Ground Headphone GND 12 16 LOUT Analogue Output Left Channel Line Output 13 17 ROUT Analogue Output Right Channel Line Output 14 18 AVDD Supply Analogue VDD 15 19 AGND Ground Analogue GND 16 20 VMID Analogue Output Mid-rail reference decoupling point 17 21 MICBIAS Analogue Output Electret Microphone Bias 18 22 MICIN Analogue Input Microphone Input (AC coupled) 19 23 RLINEIN Analogue Input Right Channel Line Input (AC coupled) 20 24 LLINEIN Analogue Input Left Channel Line Input (AC coupled) 21 25 MODE Digital Input Control Interface Selection, Pull Up (see Note 1) 22 26 CSB Digital Input 3-Wire MPU Chip Select/ 2-Wire MPU interface address selection, active low, Pull up (see Note 1) 23 27 SDIN Digital Input/Output 3-Wire MPU Data Input / 2-Wire MPU Data Input 24 28 SCLK Digital Input 3-Wire MPU Clock Input / 2-Wire MPU Clock Input 25 1 XTI/MCLK Digital Input Crystal Input or Master Clock Input (MCLK) 26 2 XTO Digital Output Crystal Output 27 3 DCVDD Supply Digital Core VDD 28 4 DGND Ground Digital GND Note: 1. Pull Up/Down only present when Control Register Interface ACTIVE=0 to conserve power. 2. It is recommended that the QFN ground paddle is connected to analogue ground on the application PCB. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |