ICS1893CFILF datasheet(10/126 Pages) ICST

10 / 126 page

ICS1893CF, Rev. F, 03/01/07

Mar. 2007

Chapter 4 Operating Modes Overview

ICS1893CF Data Sheet - Release

4.1 Reset Operations

This section first discusses reset operations in general and then specific ways in which the ICS1893CF can

be configured for various reset options.

4.1.1 General Reset Operations

The following reset operations apply to all the specific ways in which the ICS1893CF can be reset, which

are discussed in Section 4.1.2, “Specific Reset Operations”.

4.1.1.1 Entering Reset

When the ICS1893CF enters a reset condition (either through hardware, power-on reset, or software), it

does the following:

1. Isolates the MAC Interface input pins

2. Drives all MAC Interface output pins low

3. Tri-states the signals on its Twisted-Pair Transmit pins (TP_TXP and TP_TXN)

4. Initializes all its internal modules and state machines to their default states

5. Enters the power-down state

6. Initializes all internal latching low (LL), latching high (LH), and latching maximum (LMX) Management

4.1.1.2 Exiting Reset

When the ICS1893CF exits a reset condition, it does the following:

1. Exits the power-down state

2. Latches the Serial Management Port Address of the ICS1893CF into the Extended Control Register,

bits 16.10:6. [See Section 7.11.3, “PHY Address (bits 16.10:6)”.]

3. Enables all its internal modules and state machines

4. Sets all Management Register bits to their default values

5. Enables the Twisted-Pair Transmit pins (TP_TXP and TP_TXN)

6. Resynchronizes both its Transmit and Receive Phase-Locked Loops, which provide its transmit clock

(TXCLK) and receive clock (RXCLK)

7. Releases all MAC Interface pins, which takes a maximum of 640 ns after the reset condition is removed

4.1.1.3 Hot Insertion

As with the ICS189X products, the ICS1893CF reset design supports ‘hot insertion’ of its MII. (That is, the

ICS1893CF can connect its MAC Interface to a MAC while power is already applied to the MAC.)

ICS1893CFILF 数据表(PDF) 10 Page - Integrated Circuit Systems