LP3950SL datasheet(5/31 Pages) NSC

5 / 31 page

Electrical Characteristics (Notes 2, 11) (Continued)

Note 9: In applications where high power dissipation and/or poor package thermal resistance is present, the maximum ambient temperature may have to be

derated. Maximum ambient temperature (TA-MAX) is dependent on the maximum operating junction temperature (TJ-MAX-OP = 125˚C), the maximum power

dissipation of the device in the application (PD-MAX), and the junction-to ambient thermal resistance of the part/package in the application (θJA), as given by the

following equation: TA-MAX =TJ-MAX-OP −(θJA xPD-MAX).

Note 10: Junction-to-ambient thermal resistance is highly application and board-layout dependent. In applications where high maximum power dissipation exists,

special care must be paid to thermal dissipation issues in board design.

Note 11: Min and Max limits are guaranteed by design, test, or statistical analysis. Typical numbers are not guaranteed, but do represent the most likely norm.

Note 12: Low-ESR Surface-Mount Ceramic Capacitors are used in setting electrical characteristics.

Note 13: Audio block inactive.

Note 14: In single-ended and in differential mode one audio buffer only is active and IVDDA will be reduced by 90 µA (typ).

Note 15: VREF pin (Bandgap reference output) is for internal use only. A capacitor should always be placed between VREF and GND1.

LP3950SL 数据表(PDF) 5 Page - National Semiconductor (TI)

LP3950SL 数据表(HTML) 5 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

数据表下载