AD4058BCPZ-R2 datasheet(51/66 Pages) AD

51 / 66 page

Data Sheet

AD4052/AD4058

APPLICATIONS INFORMATION

analog.com

Rev. B | 51 of 66

Table 21. Serial Interface Output Data Rate Examples

VIO Range

Example fSCLK1

NBITS

fODR_MAX

VIO ≥ 3 V

62.5 MHz

1.69 MSPS

1.39 MSPS

1.18 MSPS

1.02 MSPS

3 V > VIO ≥1.7 V

33.3 MHz

1.22 MSPS

947 kSPS

772 kSPS

650 kSPS

1 The example fSCLK in this table correspond to tSCLK = 2 × tDSDO, where tDSDO is

the maximum data valid delay given in Table 5 and Table 6.

LAYOUT RECOMMENDATIONS

The following PCB layout guidelines are recommended to maximize

performance using the AD4052/AD4058:

►

Include a solid ground plane in the PCB layer underneath the

AD4052/AD4058. Ensure there are low-impedance connections

between the AD4052/AD4058 GND pins and the ground plane

layer.

►

Ensure the analog input and REF traces are physically separat-

ed from the digital interface traces to minimize crosstalk from

digital signal edges. Include a GND fill between the analog

and digital traces. Avoid routing the digital interface traces under-

neath the AD4052/AD4058 or the analog signal traces without

including a solid ground plane layer in between.

►

Ensure the impedance between the voltage reference circuitry

and the AD4052/AD4058 REF pin is as low as possible to pre-

vent VREF settling issues. Place a low effective series resistance

(ESR) decoupling capacitor as close to the AD4052/AD4058

REF pin as possible (see the Reference Circuit Design section).

Use wide traces between the voltage reference and the AD4052/

AD4058 REF pin.

►

Place the RC kickback filter capacitors as close to the IN+ and

IN− pins as possible (see the Analog Front-End Design section).

►

Place the supply decoupling capacitors as close to the VDD,

CLDO, and VIO pins as possible (see the Power Supplies

section).

AD4058BCPZ-R2 数据表(PDF) 51 Page - Analog Devices

AD4058BCPZ-R2 数据表(HTML) 51 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66

数据表下载