| 数据搜索系统,热门电子元器件搜索 |
|
STDRIVE102BH 数据表(PDF) 21 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STDRIVE102BH 数据表(HTML) 21 Page - STMicroelectronics |
|
21 / 56 page ![]() 5.2.1 Driving current management The gate driver turns on the respective MOSFET by sourcing the programmed current IGATE,on for a time equal to the programmed tcc,on time. After this time, the MOSFET’s gate should be completely charged, so the driver reduces the source current to a holding value Ihold,on. The gate driver turns off the respective MOSFET by sinking the programmed current IGATE,off for a time equal to the programmed tcc,off time. After this time, the MOSFET’s gate should be completely discharged, so the driver reduces the sink current to a holding value Ihold,off. To avoid induced turn-on effects, during the turn-on phase of a MOSFET (that is, when a driver is forcing IGATE,on) the complementary driver sinks the maximum available current Iclamp for the entire tcc,on duration. Note that the current capability is the maximum current that the driver is able to source/sink: when the gate of the external MOSFET is completely charged/discharged the driver is no longer able to source/sink current. The current levels can be summarized as below: • The value of the source current and the sink current is set by the analog voltage on IGATE input (see Table 9). • The Ihold,on current is 25 mA typical value. • The Ihold,off current is 50 mA typical value. • The Iclamp current is 2140 mA typical value. Table 9. Programmable gate current typical values IGATE level refer to Table 11 IGATE,on (source) [mA] IGATE,off (sink) [mA] 0 (GND) 25 50 1 75 150 2 150 300 3 250 500 4 300 600 5 350 700 6 400 800 7 500 1000 8 550 1100 9 600 1200 10 650 1300 11 700 1400 12 800 1600 13 850 1700 14 900 1800 15 (VDD) 1000 2000 The turn-on and turn-off timings (respectively tcc,on and a tcc,off) are set by the voltage on TCC input (see Table 10). Moreover, the input mode and the deglitch filter time of the VDS monitoring protection (tdg(VDS)) are adjusted according to the configuration of the TCC (see Section 5.2.3). STDRIVE102BH, STDRIVE102H Device description DS14545 - Rev 1 page 21/56 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |