| 数据搜索系统,热门电子元器件搜索 |
|
M50FW080 数据表(PDF) 34 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
M50FW080 数据表(HTML) 34 Page - STMicroelectronics |
|
34 / 56 page ![]() Firmware Hub (FWH) interface Configuration Registers M50FW080 34/55 6.3 Manufacturer Code Register Reading the Manufacturer Code Register returns the manufacturer code for the memory. The manufacturer code for STMicroelectronics is 20h. This register is read-only and writing to it has no effect. 6.4 Device Code Register Reading the Device Code Register returns the device code for the memory, 2Dh. This register is read-only and writing to it has no effect. Table 12. Lock Register bit definitions(1) 1. Applies to Top Block Lock Register (T_BLOCK_LK) and Top Block [-1] Lock Register (T_MINUS01_LK) to Top Block [-15] Lock Register (T_MINUS15_LK). Bit Bit name Value Function 7-3 Reserved 2 Read-Lock ‘1’ Bus Read operations in this Block always return 00h. ‘0’ Bus read operations in this Block return the Memory Array contents. (Default value). 1 Lock-Down ‘1’ Changes to the Read-Lock bit and the Write-Lock bit cannot be performed. Once a ‘1’ is written to the Lock-Down bit it cannot be cleared to ‘0’; the bit is always reset to ‘0’ following a Reset (using RP or INIT) or after power-up. ‘0’ Read-Lock and Write-Lock can be changed by writing new values to them. (Default value). 0Write-Lock ‘1’ Program and Block Erase operations in this Block will set an error in the Status Register. The memory contents will not be changed. (Default value). ‘0’ Program and Block Erase operations in this Block are executed and will modify the Block contents. Table 13. General-Purpose Input Register definition(1) 1. Applies to the General Purpose Input Register (FGPI_REG). Bit Bit Name Value Function 7-5 Reserved 4 FGPI4 ‘1’ Input Pin FGPI4 is at VIH ‘0’ Input Pin FGPI4 is at VIL 3 FGPI3 ‘1’ Input Pin FGPI3 is at VIH ‘0’ Input Pin FGPI3 is at VIL 2 FGPI2 ‘1’ Input Pin FGPI2 is at VIH ‘0’ Input Pin FGPI2 is at VIL 1 FGPI1 ‘1’ Input Pin FGPI1 is at VIH ‘0’ Input Pin FGPI1 is at VIL 0 FGPI0 ‘1’ Input Pin FGPI0 is at VIH ‘0’ Input Pin FGPI0 is at VIL |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |