| 数据搜索系统,热门电子元器件搜索 |
|
STPCINDUSTRIAL 数据表(PDF) 14 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STPCINDUSTRIAL 数据表(HTML) 14 Page - STMicroelectronics |
|
14 / 55 page ![]() STRAP OPTION 14/55 Issue 1.1 2.1.4 STRAP REGISTER 3 INDEX 3CH (STRAP3) Bits 7-0 of this register reflect the status of pins MD[47:40] respectively. They are use by the chip as follows: Bit 7-6, Reserved. Bit 5, UART2 internal or external. This bit reflects the value sampled on MD[45] pin and controls the UART2 I/F as follows: Setting to ’0’, UART2 is external. Setting to ’1’, UART2 is internal. Bit 4, UART1 internal or external and additional TFT outputs. This bit reflects the value sampled on MD[44] pin and controls the UART1 I/F and the additional TFT I/F as follows: Setting to ’0’, UART1 is external and an additional 6 TFT outputs (lowest bits - 2 red, 2 green and 2 blue) are enabled. Setting to ’1’, UART1 is internal. Note that when strap option testbus enabled (see Section 2.1.3 Strap Register 2 bit 0) is driven to 1 it takes priority over this strap which becomes meaningless. Bit 3, Parallel Port internal or external. This bit reflects the value sampled on MD[43] pin and controls the Parallel Port i/f as follows: Setting to ’0’, the Parallel Port is external Setting to ’1’, the Parallel Port is internal Bit 2, KB/Mouse internal or external. This bit reflects the value sampled on MD[42] pin and controls the KB/Mouse controller i/f as follows: Setting to ’0’, the KB/Mouse controller is external Setting to ’1’, the KB/Mouse controller is internal Bit 1, Local Bus i/f or ISA I/F. This bit reflects the value sampled on MD[41] pin and sets whether the Lo- cal Bus i/f or the ISA i/f is available at the device i/f as follows: Setting to ’0’, selectes the ISA I/F Setting to ’1’, selectec the Local Bus I/F Bit 0 PCMCIA I/F or PCI I/F. This bit reflects the value sampled on MD[40] pin and sets whether the PCMCIA i/f or the PCI i/f is available at the device i/f as follows: Setting to ’0’, selects the PCI I/F Setting to ’1’, selects the PCMCIA I/F This register defaults to the values sampled on MD[47:40] pins after reset. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |