STPCINDUSTRIAL datasheet(28/55 Pages) STMICROELECTRONICS

28 / 55 page

PIN DESCRIPTION

28/55

Issue 1.1

HSYNC

Horizontal Synchronisation Pulse. This is

the horizontal synchronization signal from the

VGA controller.

VREF_DAC

DAC Voltage reference. This pin is

an input driving the digital to analog converters.

This allows an external voltage reference source

to be used.

RSET

Resistor Current Set. This is the reference

current input to the RAMDAC. Used to set the full-

scale output of the RAMDAC.

COMP

Compensation. This is the RAMDAC com-

pensation pin. Normally, an external capacitor

(typically 10nF) is connected between this pin and

VDD to damp oscillations.

DDC[1:0]

Direct Data Channel Serial Link. These

bidirectional pins are connected to CRTC register

3Fh to implement DDC capabilities. They conform

to I2C electrical specifications, they have open-

collector output drivers which are internally con-

nected to VDD through pull-up resistors.

They can instead be used for accessing I C devic-

es on board. DDC1 and DDC0 correspond to SCL

and SDA respectively.

3.2.14 FLAT PANEL INTERFACE SIGNALS

(Combined with Serial 1)

FPFRAME,

Vertical Sync. pulse Output.

FPLINE,

Horizontal Sync. Pulse Output.

DE,

Data Enable.

R5-0,

Red Output.

G5-0,

Green Output.

B5-0,

Blue Output.

ENAVDD

Enable VDD of Flat Panel.

ENVCC

Enable VCC of Flat Panel.

PWM

PWM Back-Light Control.

3.2.15 MISCELLANEOUS

SPKRD

Speaker Drive. This is the output to the

speaker and is the AND of the counter 2 output

with bit 1 of Port 61h and drives an external speak-

er driver. This output should be connected to a

7407 type high voltage driver.

SCAN_ENABLE

Reserved. This pin is reserved

for Test and Miscellaneous functions. It has to be

set to ‘0’ or connected to ground in normal opera-

tion.

STPCINDUSTRIAL 数据表(PDF) 28 Page - STMicroelectronics

STPCINDUSTRIAL 数据表(HTML) 28 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55

数据表下载