STM32F107VC datasheet(93/95 Pages) STMICROELECTRONICS

93 / 95 page

STM32F105xx, STM32F107xx

Revision history

Doc ID 15274 Rev 4

93/95

19-Jun-2009

Section 2.3.8: Boot modes and Section 2.3.20: Ethernet MAC

interface with dedicated DMA and IEEE 1588 support updated.

Section 2.3.24: Remap capability added.

Figure 1: STM32F105xx and STM32F107xx connectivity line block

diagram and Figure 4: Memory map updated.

In Table 5: Pin definitions:

– I2S3_WS, I2S3_CK and I2S3_SD default alternate functions

added

– small changes in signal names

– Note 5 modified

– ETH_MII_PPS_OUT and ETH_RMII_PPS_OUT replaced by

ETH_PPS_OUT

– ETH_MII_MDIO and ETH_RMII_MDIO replaced by ETH_MDIO

– ETH_MII_MDC and ETH_RMII_MDC replaced by ETH_MDC

Figures: Typical current consumption in Run mode versus frequency

(at 3.6 V) - code with data processing running from RAM, peripherals

enabled and Typical current consumption in Run mode versus

frequency (at 3.6 V) - code with data processing running from RAM,

peripherals disabled removed.

Table 13: Maximum current consumption in Run mode, code with

data processing running from Flash, Table 14: Maximum current

consumption in Run mode, code with data processing running from

RAM and Table 15: Maximum current consumption in Sleep mode,

code running from Flash or RAM are to be determined.

Figure 11 and Figure 12 show typical curves. PLL1 renamed to PLL.

IDD supply current in Stop mode modified in Table 16: Typical and

maximum current consumptions in Stop and Standby modes.

Figure 10: Typical current consumption in Stop mode with regulator

in Run mode versus temperature at different VDD values, Figure 12:

Typical current consumption in Standby mode versus temperature at

different VDD values and Figure 12: Typical current consumption in

Standby mode versus temperature at different VDD values updated.

Table 17: Typical current consumption in Run mode, code with data

processing running from Flash, Table 18: Typical current

consumption in Sleep mode, code running from Flash or RAM and

Table 19: Peripheral current consumption updated.

fHSE_ext modified in Table 20: High-speed external user clock

characteristics.

Min PLL input clock (fPLL_IN), fPLL_OUT min and fPLL_VCO min

modified in Table 27: PLL characteristics.

ACCHSI max values modified in Table 24: HSI oscillator

characteristics. Table 31: EMS characteristics and Table 32: EMI

characteristics updated. Table 42: SPI characteristics updated.

Modified: Figure 23: I2S slave timing diagram (Philips protocol)(1),

Figure 24: I2S master timing diagram (Philips protocol)(1) and

Figure 26: Ethernet SMI timing diagram.

BGA100 package removed.

Section 6.2: Thermal characteristics added. Small text changes.

Table 63.

Document revision history (continued)

Date

Revision

Changes

STM32F107VC 数据表(PDF) 93 Page - STMicroelectronics

STM32F107VC 数据表(HTML) 93 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95

数据表下载