CS8427-CSZ datasheet(34/60 Pages) CIRRUS

34 / 60 page

CS8427

DS477F5

11.11 Interrupt 2 Mask (0Ch)

The bits of this register serve as a mask for the Interrupt 2 register. If a mask bit is set to 1, the error is unmasked,

meaning that its occurrence will affect the INT pin and the status register. If a mask bit is set to 0, the error is masked,

meaning that its occurrence will not affect the INT pin or the status register. The bit positions align with the corre-

sponding bits in the Interrupt 2 register. This register defaults to 00h.

11.12 Interrupt 2 Mode MSB (0Dh) & Interrupt 2 Mode LSB (0Eh)

The two Interrupt Mode registers form a 2-bit code for each Interrupt Register 1 function. There are three ways to

set the INT pin active in accordance with the interrupt condition. In the Rising edge active mode, the INT pin be-

comes active on the arrival of the interrupt condition. In the Falling edge active mode, the INT pin becomes active

on the removal of the interrupt condition. In Level active mode, the INT interrupt pin becomes active during the in-

terrupt condition. Be aware that the active level (Active High or Low) only depends on the INT[1:0] bits. These reg-

isters default to 00.

00 - Rising edge active

01 - Falling edge active

10 - Level active

11 - Reserved

11.13 Receiver Channel Status (0Fh) (Read Only)

The bits in this register can be associated with either channel A or B of the received data. The desired channel is

selected with the CHS bit of the Channel Status Data Buffer Control Register.

AUX3:0 - Incoming auxiliary data field width, as indicated by the incoming channel status bits, decoded according

to IEC60958 and AES3.

0000 - Auxiliary data is not present

0001 - Auxiliary data is 1 bit long

0010 - Auxiliary data is 2 bits long

0011 - Auxiliary data is 3 bits long

0100 - Auxiliary data is 4 bits long

0101 - Auxiliary data is 5 bits long

0110 - Auxiliary data is 6 bits long

0111 - Auxiliary data is 7 bits long

1000 - Auxiliary data is 8 bits long

1001 - 1111 Reserved

PRO - Channel status block format indicator

0 - Received channel status block is in consumer format

1 - Received channel status block is in professional format

DETUM

EFTUM

QCHM

DETU1

EFTU1

QCH1

DETU0

EFTU0

QCH0

AUX3

AUX2

AUX1

AUX0

PRO

AUDIO

COPY

ORIG

CS8427-CSZ 数据表(PDF) 34 Page - Cirrus Logic

CS8427-CSZ 数据表(HTML) 34 Page - Cirrus Logic

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

数据表下载