| 数据搜索系统,热门电子元器件搜索 |
|
MAS6502 数据表(PDF) 10 Page - Micro Analog systems |
|
|
|||||||||||||||||||||||||||||
MAS6502 数据表(HTML) 10 Page - Micro Analog systems |
|
10 / 20 page ![]() DA6502.008 29 November 2012 10 (20) EEPROM SPECIAL FUNCTIONS Register (3AHEX) controls the special EEPROM functions that includes EEPROM block erase, write and test functions. See table 5. The EEPROM control register functions are not needed in normal EEPROM use such as read and write operations. The 256-bit EEPROM consists of two 128-bit blocks, so block erase and block write applies only to one half of the EEPROM, selectable by the A4 address bit (see table 1). To erase or write the whole EEPROM, block erase or write needs to be done twice: for A4=0 and for A4=1. It is recommended to not use block erase or write functions to avoid accidental internal oscillator trimming data overwriting at A4=0 memory block. Setting the EEPROM control register bit 7 (EBE) to 1 will erase the EEPROM memory block (128 bits) specified by the A4 bit. Erased memory block consists of zeroes. Setting bit 6 (EBW) to 1 will force the EEPROM memory block specified by the A4 bit to be programmed to the same 8-bit word found in the EEPROM data input register (39HEX). Note: after block operations the block erase (EBE) or write (EBW) control bit need to be written back to value 0 to return normal operation. Table 5. MAS6502 EEPROM control register (3AHEX) Bit Number Bit Name Description Value Function 7 EBE EEPROM Block Erase 0 1 - Erase 128-bit block of EEPROM 6 EBW EEPROM Block Write 0 1 - Write EEPROM data input register (39HEX ) data into 128-bit block of EEPROM 5 EETEST EEPROM Test Mode Enable 0 1 - Test mode enabled 4-3 VEE[1:0] EEPROM test read mode selection 11 10 00 01 Internal high test read Internal low test read FORBIDDEN FORBIDDEN 2 CPTEST Charge pump test input pin 0 1 Programming allowed Output protection of CP disabled 1 DMA Direct Memory Access TBD TBD 0 PARITY Parity Access TBD TBD TBD = To be defined The MAS6502 EEPROM status register (3CHEX), bits (7:6), reflect the EEPROM operation status. See table 6. This register can be used to verify that the EEPROM operation has been accomplished without errors. Table 6. MAS6502 EEPROM status register (3CHEX). Only bits (7:6) are used. Bit Number Bit Name Description Value Function 7 ERROR EEPROM error detection 0 1 No errors 1 (or more) data error(s) 6 DED EEPROM double error detection 0 1 No errors 2 (or more) data errors 5-0 X - X = Don’t care |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |