33FJ128GP708 datasheet(47/90 Pages) MICROCHIP

47 / 90 page

Preliminary

DS70155C-page 45

dsPIC33F

10.6

MPLAB ICD 2 In-Circuit Debugger

The MPLAB ICD 2 In-Circuit Debugger is a powerful,

low-cost, run-time development tool that uses in-circuit

debugging capability built into the dsPIC33F Flash

devices. This feature, along with Microchip’s In-Circuit

Serial Programming™ protocol, gives you cost-effective,

in-circuit debugging from the graphical user interface of

MPLAB IDE. It lets you develop and debug source code

by watching variables, single-stepping and setting

breakpoints, as well as running at full speed to test

hardware in real time.

The MPLAB ICD 2 has these features:

• Full-speed operation to the range of the device

• Serial or USB PC connector

• USB-powered from PC interface

• Low noise power (VPP and VDD) for use with

analog and other noise sensitive applications

• Operation down to 2.0V

• Can be used as debugger and inexpensive serial

programmer

• Some device resources required (80 bytes of

RAM and 2 pins)

FIGURE 10-4:

MPLAB® ICD 2 IN-CIRCUIT

DEBUGGER

10.7

MPLAB PM3 Universal Device

Programmer

The MPLAB PM3 Universal Device Programmer is easy

to use with a PC, or as a stand-alone unit, to program

Microchip’s entire line of PICmicro devices as well as the

latest dsPIC33F DSC devices. The MPLAB PM3

features a large and bright LCD unit (128 x 64 pixels) to

display easy menus, programming statistics and status

information.

The

MPLAB

PM3

programmer

has

exceptional

programming speed for high production throughput,

especially important for large memory devices. It also

includes a Secure Digital/Multimedia Card slot for easy

and secure data storage and transfer.

The MPLAB PM3 programmer is designed with

40 programmable socket pins and therefore, each

socket module can be configured to support many

different devices. As a result, fewer socket modules are

required to support the entire line of Microchip parts.

The socket modules use multi-pin connectors for high

reliability and quick interchange.

When connected to a PC host system, the MPLAB

PM3 programmer is seamlessly integrated with the

MPLAB Integrated Development Environment (IDE),

providing a user-friendly programming interface.

Key features of the MPLAB PM3 Programmer include:

• RS-232 or USB interface

• Integrated In-Circuit Serial Programming™

(ICSP™) interface

• Fast programming time

• Three operating modes:

- PC Host mode for full control

- Safe mode for secure data

- Stand-Alone mode for programming without

a PC

• Complete line of interchangeable socket modules

to support all Microchip devices and package

options (sold separately)

•SQTPSM serialization for programming unique

serial numbers while in PC Host mode.

• An alternate DOS command line interface for

batch control

• Large easy-to-read display

• Field upgradeable firmware allows quick new

device support

• Secure Digital (SD) and Multimedia Card (MMC)

external memory support

• Buzzer notification for noisy environments

FIGURE 10-5:

MPLAB® PM3 DEVICE

PROGRAMMER

33FJ128GP708 数据表(PDF) 47 Page - Microchip Technology

33FJ128GP708 数据表(HTML) 47 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90

数据表下载