数据搜索系统,热门电子元器件搜索
  Chinese  ▼
ALLDATASHEETCN.COM

X  

GMS81C7008 数据表(PDF) 10 Page - Hynix Semiconductor

部件名 GMS81C7008
功能描述  HYNIX SEMICONDUCTOR INC. 8-BIT SINGLE-CHIP MICROCONTROLLERS
PDF  123 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
制造商  HYNIX [Hynix Semiconductor]
网页  http://www.skhynix.com/kor/main.do
标志 HYNIX - Hynix Semiconductor

GMS81C7008 数据表(HTML) 10 Page - Hynix Semiconductor

Back Button GMS81C7008 Datasheet HTML 6Page - Hynix Semiconductor GMS81C7008 Datasheet HTML 7Page - Hynix Semiconductor GMS81C7008 Datasheet HTML 8Page - Hynix Semiconductor GMS81C7008 Datasheet HTML 9Page - Hynix Semiconductor GMS81C7008 Datasheet HTML 10Page - Hynix Semiconductor GMS81C7008 Datasheet HTML 11Page - Hynix Semiconductor GMS81C7008 Datasheet HTML 12Page - Hynix Semiconductor GMS81C7008 Datasheet HTML 13Page - Hynix Semiconductor GMS81C7008 Datasheet HTML 14Page - Hynix Semiconductor Next Button
Zoom Inzoom in Zoom Outzoom out
 10 / 123 page
background image
GMS81C7008/7016
6
APR., 2001 Ver 2.01
5. PIN FUNCTION
VDD: Supply voltage.
VSS: Circuit ground.
RESET: Reset the MCU.
AVDD: Supply voltage to the ladder resistor of ADC circuit. To
enhance the resolution of analog to digital converter, use inde-
pendent power source as well as possible, other than digital pow-
er source.
AVSS: ADC circuit ground.
XIN: Input to the inverting oscillator amplifier and input to the in-
ternal main clock operating circuit.
XOUT: Output from the inverting oscillator amplifier.
BIAS: LCD bias voltage input pin.
VCL0~VCL2: LCD driver power supply pins. The voltage on
each pin is VCL2
> VCL1> VCL0. For details, Refer to “18. LCD
DRIVER” on page 70.
COM0~COM3: LCD common signal output pins. Also, the pins
of COM1,COM2 and COM3 are shared with LCD segment sig-
nal outputs of SEG26, SEG25, SEG24 as application require-
ment.
SXIN: Input to the internal subsystem clock operating circuit. In
addition, SXIN is shared with the R36 which is selected by the
software option.
SXOUT: Output from the inverting subsystem oscillator amplifi-
er. In addition, SXOUT is shared with the R35 which is selected
by the software option.
R00~R07: R0 is an 8-bit CMOS bidirectional I/O port. R0 pins 1
or 0 written to the Port Direction Register can be used as outputs
or schmitt trigger inputs. Also, pull-up resistors and open-drain
outputs are software assignable.
In addition, R0 serves the functions of the various following spe-
cial features.
R10~R11: R1 is a 2-bit CMOS bidirectional I/O port. R1 pins 1
or 0 written to the Port Direction Register can be used as outputs
or inputs. Also, pull-up resistors and open-drain outputs are soft-
ware assignable. These pins are not served on 81C71XX.
In addition, R0 serves the functions of the various following spe-
cial features.
R20~R27: R2 is an 8-bit CMOS bidirectional I/O port. R2 pins 1
or 0 written to the Port Direction Register can be used as outputs
or inputs. Also, pull-up resistors and open-drain outputs are soft-
ware assignable.R24~R27 are not served on 81C71XX.
In addition, R2 is shared with the ADC input.
R30~R36: R3 is a 7-bit CMOS bidirectional I/O port. R3 pins 1
or 0 written to the Port Direction Register can be used as outputs
or inputs. Also, pull-up resistors and open-drain outputs are soft-
ware assignable. R33, R34 are not served on 81C71XX.
In addition, R3 serves the functions of the various follow-
ing special features.
SEG0~SEG7: These pins generate LCD segment signal output.
Every LCD segment pins are shared with normal R4 input/output
port. R4 is an 8-bit CMOS bidirectional I/O port. R4 pins 1 or 0
written to the Port Direction Register can be used as outputs or in-
Port pin
Alternate function
R00
R01
R02
R03
R04
R05
R06
R07
INT0 (External interrupt 0)
INT1 (External interrupt 1)
INT2 (External interrupt 2)
EC0 (Event counter input 0)
EC2 (Event counter input 2)
SCK (Serial clock)
SO
(Serial data output)
SI
(Serial data input)
Port pin
Alternate function
R00
R01
KS0 (Key scan 0)
KS1 (Key scan 1)
Port pin
Alternate function
R20
R21
R22
R23
R24
R25
R26
R27
AN0 (Analog Input 0)
AN1 (Analog Input 1)
AN2 (Analog Input 2)
AN3 (Analog Input 3)
AN4 (Analog Input 4)
AN5 (Analog Input 5)
AN6 (Analog Input 6)
AN7 (Analog Input 7)
Port pin
Alternate function
R30
R31
R32
R33
R34
R35
R36
BUZ (Buzzer driving output)
PWM0 / T1O (PWM 0 output
/ Timer 1 output)
PWM1 /T3O (PWM 1 output
/ Timer 3 output)
-
WDTO (Watchdog timer output)
SXOUT (Sub clock output)
SXIN (Sub clock input)



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100  ...More


数据表 下载

Go To PDF Page


链接网址



ALLDATASHEET是否为您带来帮助?  [ DONATE ] 

关于 Alldatasheet   |   广告服务   |   联系我们   |   隐私政策   |   数据表链接    |   链接交换   |   制造商名单
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com