ICS5342

GENDAC

6

Note: Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress

rating only and functional operation of the device at these or any other conditions above those indicated in the operational sec-

tions of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect de-

vice reliability.

Electrical Characteristics

DC CHARACTERISTICS (note: J)

Parameter

Symbol

Min.

Max.

Units

Test Conditions

Positive supply voltage

4.75

5.25

V

Input logic “1” voltage

2.0

V

Input logic “0” voltage

– 0.5

0.8

V

Reference current

–7.0

–10

mA

Reference voltage

1.10

1.35

V

Digital input current

± 10

µAV

Off-state digital output current

± 50

µAV

Average power supply current

250

mA

unloaded

DACs in power down mode

50

mA

no palette access

Sense logic “1”

2.4

V

Sense logic “0”

0.4

V

Clock logic “1”

2.4

V

Clock logic “0”

0.4

V

Logic “1”

2.4

V

Logic “0”

0.4

V

XIN input clock rise time

15

ns

TTL levels

XIN input clock fall time

15

ns

TTL levels

Frequency change of CLK0 and

CLK1 over supply and tempera-

ture

FD

0.05

%

with respect to typical frequency

Power Supply Voltage........................................................7 V

Temperature under bias ................................ – 40˚ C to 85˚ C

Storage Temperature................................... – 65˚ C to 150˚ C

DC Digital Output Current ......................................... 25 mA

Analog Output Current ................................................ 45 mA

Reference Current ...................................................... –15 mA

Power Dissipation ......................................................... 1.0 W

Absolute Maximum Ratings