| 数据搜索系统,热门电子元器件搜索 |
|
ADE7166 数据表(PDF) 83 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
ADE7166 数据表(HTML) 83 Page - Analog Devices |
|
83 / 152 page ![]() ADE7116/ADE7156/ADE7166/ADE7169/ADE7566/ADE7569 Rev. B | Page 83 of 152 Table 58. Program Control SFR (PCON, Address 0x87) Bit Mnemonic Default Description 7 SMOD 0 Double baud rate control. [6:0] Reserved 0 Reserved. These bits must be kept at 0 for proper operation. Table 59. Data Pointer Low SFR (DPL, Address 0x82) Bit Mnemonic Default Description [7:0] DPL 0 These bits contain the low byte of the data pointer. Table 60. Data Pointer High SFR (DPH, Address 0x83) Bit Mnemonic Default Description [7:0] DPH 0 These bits contain the high byte of the data pointer. Table 61. Data Pointer SFR (DPTR, Address 0x82 and Address 0x83) Bit Mnemonic Default Description [15:0] DP 0 These bits contain the 2-byte address of the data pointer. DPTR is a combination of the DPH and DPL SFRs. Table 62. Stack Pointer SFR (SP, Address 0x81) Bit Mnemonic Default Description [7:0] SP 7 These bits contain the eight LSBs of the pointer for the stack. Table 63. Configuration SFR (CFG, Address 0xAF) Bit Mnemonic Default Description 7 Reserved 1 Reserved. This bit should be left set for proper operation. 6 EXTEN 0 Enhanced UART enable bit. EXTEN Result 0 Standard 8052 UART without enhanced error-checking features. 1 Enhanced UART with enhanced error checking (see the UART Additional Features section). 5 SCPS 0 Synchronous communication selection bit. SCPS Result 0 I2C port is selected for control of the shared I2C/SPI pins and SFRs. 1 SPI port is selected for control of the shared I2C/SPI pins and SFRs. 4 MOD38EN 0 38 kHz modulation enable bit. MOD38EN Result 0 38 kHz modulation is disabled. 1 38 kHz modulation is enabled on the pins selected by the MOD38[7:0] bits in the extended port configuration SFR (EPCFG, Address 0x9F). [3:2] Reserved 00 Reserved. These bits should be kept at 0 for proper operation. [1:0] XREN1, XREN0 01 XREN[1:0] Result XREN1 OR XREN0 = 1 Enable MOVX instruction to use 256 bytes of extended RAM. XREN1 AND XREN0 = 0 Disable MOVX instruction. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |