STM32F479AI datasheet(128/208 Pages) STMICROELECTRONICS

128 / 208 page

Electrical characteristics

STM32F479xx

128/208

DocID028010 Rev 2

Software recommendations

The software flowchart must include the management of runaway conditions such as:

•

Corrupted program counter

•

Unexpected reset

•

Critical Data corruption (control registers...)

Prequalification trials

Most of the common failures (unexpected reset and program counter corruption) can be

reproduced by manually forcing a low state on the NRST pin or the Oscillator pins for 1

second.

To complete these trials, ESD stress can be applied directly on the device, over the range of

specification values. When unexpected behavior is detected, the software can be hardened

to prevent unrecoverable errors occurring (see application note AN1015).

Electromagnetic Interference (EMI)

The electromagnetic field emitted by the device are monitored while a simple application,

executing EEMBC? code, is running. This emission test is compliant with SAE IEC61967-2

standard which specifies the test board and the pin loading.

5.3.18

Absolute maximum ratings (electrical sensitivity)

Based on three different tests (ESD, LU) using specific measurement methods, the device is

stressed in order to determine its performance in terms of electrical sensitivity.

Electrostatic discharge (ESD)

Electrostatic discharges (a positive then a negative pulse separated by 1 second) are

applied to the pins of each sample according to each pin combination. The sample size

depends on the number of supply pins in the device (3 parts × (n+1) supply pins). This test

conforms to the ANSI/ESDA/JEDEC JS-001 and ANSI/ESD S5.3.1 standards.

Table 54. EMI characteristics

Symbol Parameter

Conditions

Monitored

frequency band

Max vs. [fHSE/fCPU]

Unit

8/168 MHz 8/180 MHz

SEMI

Peak level

VDD = 3.3 V, TA = 25 °C, TFBGA216

package, conforming to SAE J1752/3

EEMBC, ART ON, all peripheral clocks

enabled, clock dithering disabled.

0.1 to 30 MHz

dBµV

30 to 130 MHz

130 MHz to 1GHz

SAE EMI Level

VDD = 3.3 V, TA = 25 °C, TFBGA216

package, conforming to SAE J1752/3

EEMBC, ART ON, all peripheral clocks

enabled, clock dithering enabled

0.1 to 30 MHz

-10

dBµV

30 to 130 MHz

-15

130 MHz to 1GHz

SAE EMI level

STM32F479AI 数据表(PDF) 128 Page - STMicroelectronics

STM32F479AI 数据表(HTML) 128 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载