STM8AL3136 datasheet(73/124 Pages) STMICROELECTRONICS

73 / 124 page

DocID18474 Rev 7

73/124

STM8AL313x/4x/6x STM8AL3L4x/6x

Electrical parameters

108

Current consumption of on-chip peripherals

Table 28. Peripheral current consumption

Symbol

Parameter

Typ.

VDD = 3.0 V

Unit

IDD(TIM1)

TIM1 supply current(1)

µA/MHz

IDD(TIM2)

TIM2 supply current (1)

IDD(TIM3)

TIM3 supply current (1)

IDD(TIM4)

TIM4 timer supply current (1)

IDD(USART1)

USART1 supply current (2)

IDD(SPI1)

SPI1 supply current (2)

IDD(I2C1)

I2C1 supply current (2)

IDD(DMA1)

DMA1 supply current(2)

IDD(WWDG)

WWDG supply current(2)

IDD(ALL)

Peripherals ON(3)

IDD(ADC1)

ADC1 supply current(4)

1500

µA

IDD(DAC)

DAC supply current(5)

370

IDD(COMP1)

Comparator 1 supply current(6)

0.160

IDD(COMP2)

Comparator 2 supply current(6)

Slow mode

Fast mode

IDD(PVD/BOR)

Power voltage detector and brownout Reset unit supply

current (7)

2.6

IDD(BOR)

Brownout Reset unit supply current (7)

2.4

IDD(IDWDG)

Independent watchdog supply current

including LSI supply

current

0.45

excluding LSI

supply current

0.05

1. Data based on a differential IDD measurement between all peripherals OFF and a timer counter running at 16 MHz. The

CPU is in Wait mode in both cases. No IC/OC programmed, no I/O pins toggling. Not tested in production.

2. Data based on a differential IDD measurement between the on-chip peripheral in reset configuration and not clocked and

the on-chip peripheral when clocked and not kept under reset. The CPU is in Wait mode in both cases. No I/O pins toggling.

Not tested in production.

3. Peripherals listed above the IDD(ALL) parameter ON: TIM1, TIM2, TIM3, TIM4, USART1, SPI1, I2C1, DMA1, WWDG.

4. Data based on a differential IDD measurement between ADC in reset configuration and continuous ADC conversion.

5. Data based on a differential IDD measurement between DAC in reset configuration and continuous DAC conversion of

VDD /2. Floating DAC output.

6. Data based on a differential IDD measurement between COMP1 or COMP2 in reset configuration and COMP1 or COMP2

enabled with static inputs. Supply current of internal reference voltage excluded.

7. Including supply current of internal reference voltage.

STM8AL3136 数据表(PDF) 73 Page - STMicroelectronics

STM8AL3136 数据表(HTML) 73 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载