| 数据搜索系统,热门电子元器件搜索 |
|
USB84604 数据表(PDF) 40 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
USB84604 数据表(HTML) 40 Page - Microchip Technology |
|
40 / 61 page ![]() USB84604 DS60001295C-page 40 2014-2016 Microchip Technology Inc. 9.0 OPERATIONAL CHARACTERISTICS 9.1 Absolute Maximum Ratings* VBAT Supply Voltage (Note 1) 0 V to +5.5 V VDDCOREREG Supply Voltage (Note 1) 0 V to +3.6 V Positive voltage on input signal pins, with respect to ground (Note 2)3.6 V Negative voltage on input signal pins, with respect to ground (Note 3)-0.5 V Positive voltage on XTAL1/REFCLK, with respect to ground VDDCR12 Positive voltage on HSIC signals, with respect to ground 1.32 V Positive voltage on USB DP/DM signals, with respect to ground (Note 4)5.5 V Storage Temperature -55 °C to +150 °C Maximum Junction Temperature (Tjmax) +125 °C Lead Temperature Range Refer to JEDEC Spec. J-STD-020 HBM ESD Performance JEDEC Class 3A *Stresses exceeding those listed in this section could cause permanent damage to the device. This is a stress rating only. Exposure to absolute maximum rating conditions may affect device reliability. Functional operation of the device at any condition exceeding those indicated in Section 9.2, "Operating Conditions**", Section 9.5, "DC Specifications", or any other applicable section of this specification is not implied. Note, device signals are NOT 5 volt tolerant unless specified otherwise. Note 1: When powering this device from laboratory or system power supplies, it is important that the absolute max- imum ratings not be exceeded or device failure can result. Some power supplies exhibit voltage spikes on their outputs when AC power is switched on or off. In addition, voltage transients on the AC power line may appear on the DC output. If this possibility exists, it is suggested to use a clamp circuit. Note 2: This rating does not apply to the following signals: All USB DM/DP pins, XTAL1/REFCLK, XTAL2, and all HSIC signals. Note 3: This rating does not apply to the HSIC signals. Note 4: This rating applies only when VDD33 is powered. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |