| 数据搜索系统,热门电子元器件搜索 |
|
USB84604 数据表(PDF) 48 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
USB84604 数据表(HTML) 48 Page - Microchip Technology |
|
48 / 61 page ![]() USB84604 DS60001295C-page 48 2014-2016 Microchip Technology Inc. 9.6.2 RESET AND CONFIGURATION STRAP TIMING Figure 9-4 illustrates the RESET_N timing requirements and its relation to the configuration strap signals. Assertion of RESET_N is not a requirement. However, if used, it must be asserted for the minimum period specified. Refer to Section 8.4, "Resets," on page 38 for additional information on resets. Refer to Section 6.3, "Device Configu- ration Straps," on page 29 for additional information on configuration straps. 9.6.3 USB TIMING All device USB signals conform to the voltage, power, and timing characteristics/specifications as set forth in the Uni- versal Serial Bus Specification. Please refer to the Universal Serial Bus Specification, Revision 2.0, available at http:// www.usb.org [ 2]. 9.6.4 HSIC TIMING All device HSIC signals conform to the voltage, power, and timing characteristics/specifications as set forth in the High- Speed Inter-Chip USB Electrical Specification. Please refer to the High-Speed Inter-Chip USB Electrical Specification, Version 1.0, available at http://www.usb.org [ 4]. 9.6.5 SMBus TIMING All device SMBus signals conform to the voltage, power, and timing characteristics/specifications as set forth in the Sys- tem Management Bus Specification. Please refer to the System Management Bus Specification, Version 1.0, available at http://smbus/org/specs [ 6]. 9.6.6 I2C TIMING All device I2C signals conform to the 100 kHz Standard Mode (Sm) voltage, power, and timing characteristics/specifica- tions as set forth in the I2C-Bus Specification. Please refer to the I2C-Bus Specification, available at http://www.nxp.com [ 5]. FIGURE 9-4: RESET_N CONFIGURATION STRAP TIMING TABLE 9-10: RESET_N CONFIGURATION STRAP TIMING Symbol Description Min Typ Max Units trstia RESET_N input assertion time 5 µs tcsh Configuration strap hold after RESET_N deassertion 1 ms RESET_N Configuration Straps trstia tcsh |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |