| 数据搜索系统,热门电子元器件搜索 |
|
FT221XS-R 数据表(PDF) 11 Page - Future Technology Devices International Ltd. |
|
|
|||||||||||||||||||||||||||||
FT221XS-R 数据表(HTML) 11 Page - Future Technology Devices International Ltd. |
|
11 / 45 page ![]() Copyright © 2013 Future Technology Devices International Limited 11 FT221X USB 8-BIT SPI/FT1248 IC Datasheet Version 1.3 Document No.: FT_000630 Clearance No.: FTDI# 263 3.3 CBUS Signal Options The following options can be configured on the CBUS I/O pin. CBUS signal options are common to both package versions of the FT221X. These options can be configured in the internal MTP memory using the software utility FT_PROG, which can be downloaded from the FTDI Utilities (www.ftdichip.com). The default configuration is described in Section 9. CBUS Signal Option Available On CBUS Pin Description TRI-STATE CBUS3 IO Pad is tri-stated DRIVE 1 CBUS3 Output a constant 1 DRIVE 0 CBUS3 Output a constant 0 PWREN# CBUS3 Output is low after the device has been configured by USB, then high during USB suspend mode. This output can be used to control power to external logic P-Channel logic level MOSFET switch. Enable the interface pull- down option when using the PWREN# in this way. SLEEP# CBUS3 Goes low during USB suspend mode. Typically used to power down external logic. CLK24MHz CBUS3 24 MHz Clock output.* CLK12MHz CBUS3 12 MHz Clock output.* CLK6MHz CBUS3 6 MHz Clock output.* GPIO CBUS3 CBUS bit bang mode option. Allows the CBUS pin to be used as general purpose I/O. Configured in the internal MTP memory. A separate application note, AN232R-01, available from FTDI website (www.ftdichip.com) describes in more detail how to use CBUS bit bang mode. BCD Charger CBUS3 Battery charge Detect, indicates when the device is connected to a dedicated battery charger host. Active high output. BCD Charger# CBUS3 Inverse of BCD Charger BitBang_WR# CBUS3 Synchronous and asynchronous bit bang mode WR# strobe output. BitBang_RD# CBUS3 Synchronous and asynchronous bit bang mode RD# strobe output. VBUS Sense CBUS3 Input to detect when VBUS is present. Time Stamp CBUS3 Toggle signal which changes state each time a USB SOF is received Keep_Awake# CBUS3 Prevents the device from entering suspend state when unplugged. Table 3.7 CBUS Configuration Control *When in USB suspend mode the outputs clocks are also suspended. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |