| 数据搜索系统,热门电子元器件搜索 |
|
WM8972LEFL/R 数据表(PDF) 32 Page - Wolfson Microelectronics plc |
|
|
|||||||||||||||||||||||||||||
WM8972LEFL/R 数据表(HTML) 32 Page - Wolfson Microelectronics plc |
|
32 / 49 page ![]() WM8972L Preliminary Technical Data w PTD Rev 2.2 June 2004 32 MASTER MODE ADCLRC AND DACLRC ENABLE In Master mode, by default ADCLRC is disabled when the ADC is disabled and DACLRC is disabled when the DAC is disabled. Register bit LRCM, register 24(18h) bit[2] changes the control so that the ADCLRC and DACLRC are disabled only when ADC and DAC are disabled. This enables the user to use e.g. ADCLRC for both ADC and DAC LRCLK and disable the ADC when DAC only operation is required, (see Table 26). REGISTER ADDRESS BIT LABEL DEFAULT DESCRIPTION R24(18h) Additional Control (2) 2 LRCM 0 Selects disable mode for ADCLRC and DACLRC 0 = ADCLRC disabled when ADC disabled DACLRC disabled when DAC disabled 1 = ADCLRC and DACLRC disabled only when ADC and DAC are disabled. Table 26 ADCLRC/DACLRC Enable CLOCK OUTPUT By default ADCLRC (pin 9) is the ADC word clock input/output. Under the control of ADCLRM[1:0], register 27(1Bh) bits [8:7] the ADCLRC pin may be configured as a clock output. If ADCLRM is 01, 10 or 11 then ADCLRC pin is always an output even in slave mode or when TRI = ‘1’, (see Table 27). REGISTER ADDRESS BIT LABEL DEFAULT DESCRIPTION R27(18h) Additional Control (3) [8:7] ADCLRM [1:0] 00 Configures ADCLRC pin 00 = ADCLRC is ADC word clock input (slave mode) or ADCLRC output (master mode) 01 = ADCLRC pin is MCLK output 10 = ADCLRC pin is MCLK / 5.5 output 11 = ADCLRC pin is MCLK / 6 output Table 27 ADCLRC Clock Output CLOCKING AND SAMPLE RATES The WM8972L supports a wide range of master clock frequencies on the MCLK pin, and can generate many commonly used audio sample rates directly from the master clock. The ADC and DAC do not need to run at the same sample rate; several different combinations are possible. There are two clocking modes: • ‘Normal’ mode supports master clocks of 128fs, 192fs, 256fs, 384fs, and their multiples (Note: fs refers to the ADC or DAC sample rate, whichever is faster) • USB mode supports 12MHz or 24MHz master clocks. This mode is intended for use in systems with a USB interface, and eliminates the need for an external PLL to generate another clock frequency for the audio CODEC. REGISTER ADDRESS BIT LABEL DEFAULT DESCRIPTION 6 CLKDIV2 0 Master Clock Divide by 2 1 = MCLK is divided by 2 0 = MCLK is not divided 5:1 SR [4:0] 00000 Sample Rate Control R8 (08h) Clocking and Sample Rate Control 0 USB 0 Clocking Mode Select 1 = USB Mode 0 = ‘Normal’ Mode Table 28 Clocking and Sample Rate Control |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |